Headlight Adjustment - Triumph Street Triple Owner's Handbook Manual

Maintenance and Adjustment

Headlight Adjustment

Headlight Adjustment - Vertical
cgfc_2
1. Vertical beam adjuster bolts
The vertical beams of the left and right hand
headlights can only be adjusted together.
Independent adjustment is not possible.
Switch the headlight dipped beam on.
Slacken the clamp bolts sufficiently to allow
restricted movement of the headlights.
Adjust the position of the headlights to give
the required beam setting.
Tighten the clamp bolts, front first, to 15 Nm.
Re-check the headlight beam settings.
Switch the headlights off when the beam
settings are satisfactorily set.
114
Headlight Adjustment - Horizontal
1
cgfc_3
1. Headlight mounting nut
The horizontal beams of both headlights can
be adjusted individually. The same procedure
is used to adjust either headlight.
Switch the headlight dipped beam on.
Slacken the headlight mounting nut.
Adjust the horizontal position of the headlight
to give the required beam setting.
Tighten the nut to 30 Nm.
Repeat for the second headlight.
Re-check the headlight beam settings.
Switch the headlights off when both beam
settings are satisfactorily set.
1