Table of Contents
Advertisement
4.6 What to do if...
Problem
Pouring water becomes more
difficult
The kettle turns off before
boiling
The appliance does not turn
on
Cleaning and maintenance
Cause
Scale build-up on filter
The base of the kettle has
excessive scale build-up
Too little water has been
added to the kettle
The safety device has
tripped out due to the kettle
being operated without
water
The plug is not properly
inserted in the power socket
The cable is defective
Lack of power
Solution
Check that the filter is clean
and correctly positioned
Descale more frequently
Increase the quantity of
water until you reach at least
the minimum level
Let the kettle cool down
before attempting to boil
water again
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Check that the house's main
breaker is on
Have the cable replaced at
an Authorised Service
Centre
Check that the house's main
breaker is on
17
- Quick Links:
- Before First Use
- Operation
- Cleaning the Filter
- Descaling
- What to Do if
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Kettle and is the answer not in the manual?
Questions and answers
There is the signs plus and minus on the both sides of the lever in my Smeg kettle. Do I have to push the lever to toward the positive sign to start boiling the water?
The document does not mention a positive sign. However, to start boiling water in your Smeg kettle, you need to push the lever downwards. The LED indicator will turn on, and the kettle will begin heating.
This answer is automatically generated