Summary of Contents for Unifire UF-F80z
- Page 1 ’ M ERIES MOKE ACHINES ANUAL Manual for Smoke Machines: UF-F80z, UF-Z800, UF-Z1000, and UF-Z1500 3924 E. TRENT AVE. SPOKANE, WA 99202 PHONE: 1-800-745-3282 509-535-7746 FAX: 509-535-9064 WWW.UNIFIREUSA.COM...
- Page 2 User Manual Unifire Unifire Antari Z Series Fog Machine Congratulations on the purchase of your new UNIFIRE ANTARI Z Series FOG MACHINE. Introduction Thank you for choosing an ANTARI Fog Machine. You now own a rugged and powerful tate-of-the-art UNIFIRE machine.
- Page 3 �� The output nozzle becomes very hot during operation (300°C). Keep flammable materials at least 50 cm away from the nozzle. �� Always allow your ANTARI Fog Machine to cool down before attempting to clean or UNIFIRE service it. Danger of explosion ��...
- Page 4 �� To emit fog, press the appropriate button on the remote for the desired length of time. �� The remote unit’s lamp will cycle on and off as the machine re-heats to the proper operating temperature. UNIFIRE �� For further information on operating your ANTARI Fog Machine, see the section titled, “Remote Control Operation”.
- Page 5 4. Press the Manual key for immediate triggering of the fog emission at 100 % volume. Let the Manual key loose in order to stop the fog emission. For control of the DMX settings please refer to the section on Page 6 titled Antari UNIFIRE Z-Series Onboard DMX Fog Machine Settings ��...
- Page 6 �� If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified person in order to avoid a hazard. Please read and save these instructions Unifire Unifire Antari Z-Series Onboard DMX Fog Machine Settings...
- Page 7 Note: In the example above, if the machine were assigned the DMX address of 124, Channel A would correspond to DMX address 124. In general, Antari fog machines with onboard DMX conform to the following performance UNIFIRE specifications: 1. Average Operating temperature = 250ºC 2.
Need help?
Do you have a question about the UF-F80z and is the answer not in the manual?
Questions and answers