Initial Setup - Panasonic KX-HNB600 Setup Manual

Setup
Compatible mobile devices
®
iPhone 4 or later, iPad
6.0 or later) or an Android™ device (Android
4.0 or later)
Note:
R The [Home Network] app may not function
properly depending on the system
environment, such as the model of your
mobile device, peripherals connected to
your mobile device, and the apps installed
on your mobile device.

Initial setup

Confirm the following before you begin.
– Make sure you have installed the [Home
Network] app on your mobile device
– Make sure your mobile device can connect
to the Internet
– Make sure the hub and your wireless router
are turned on and the hub's LED indicator
is lit in yellow
– Make sure you know the network name
(SSID) and password assigned to your
wireless router
Initial setup for iPhone, iPad
1
Start the [Home Network] app.
2
Tap [Set up the Hub].
3
When prompted, press MWi-Fi SETUPN
on the hub.
R The LED indicator blinks in yellow.
4
Change your mobile device's Wi-Fi
setting temporarily so that it connects to
the hub directly.
R Open your mobile device's [Settings]
app, tap [Wi-Fi], select "KX-HNB600",
enter "00000000" as the password,
and then tap [Join].
R If more than 1 item named
"KX-HNB600" is displayed, wait
approx. 10 minutes and perform this
procedure from the beginning.
5
Start the [Home Network] app again.
12
®
, or iPad mini™ (iOS
For assistance, please visit www.panasonic.com/support
6
If necessary, enter the password required
to connect to your wireless router and
then tap [Next].
R The hub and your mobile device
connect to your wireless router.
R If prompted, follow the on-screen
instructions and connect your mobile
device to your wireless router, start the
app again, and then tap [Add Mobile
Device].
7
When prompted, press MWi-Fi SETUPN
on the hub.
R Your mobile device will be registered
to the hub.
8
When prompted, follow the on-screen
instructions and set the password used to
log in to the hub while away from home.
9
Follow the on-screen instructions to finish
setting up the hub.
R The app's home screen is displayed
when initial setup is complete.
Initial setup for Android devices
1
Start the [Home Network] app.
2
Tap [Set up the Hub].
3
When prompted, press MWi-Fi SETUPN
on the hub.
R The LED indicator blinks in yellow.
R The app temporarily changes your
mobile device's Wi-Fi setting so that it
connects to the hub directly.
4
If necessary, enter the password required
to connect to your wireless router and
then tap [Next].
R The hub and your mobile device
connect to your wireless router.
5
When prompted, press MWi-Fi SETUPN
on the hub.
R Your mobile device will be registered
to the hub.
6
When prompted, follow the on-screen
instructions and set the password used to
log in to the hub while away from home.
R The app's home screen is displayed
when initial setup is complete.