Digital Display; Child Lock Safety Provision; Automatic Detergent Dispenser Tray - IFB Digital User Manual

DIGITAL DISPLAY

The digital display gives you the complete information while setting of the program,
balance time of the program, fault indications if any etc.
If you have chosen "child lock" option, then "CH" will be displayed.
If the washing machine encounters a problem during program run then the corresponding
error code will be displayed. For further details, please refer the topic 'Trouble shooting'
page 23.

CHILD LOCK SAFETY PROVISION

You can safeguard your washing machine to prevent any unintentional changes to the
selected options and to the program sequence by activating Child lock feature.
To activate "Child lock" feature press "Soak Option" and "Delay Start" buttons
simultaneously. The Display of "CH" message on the display indicates that the Child lock
option is activated. Child lock is to be set after starting the program.
Child lock feature makes all the functional buttons inoperative.
To deactivate the child lock, press the same two buttons simultaneously. "CH" message will
disappear.
If child lock is opted, it has to be disabled to make any changes in the options during program
run.

AUTOMATIC DETERGENT DISPENSER TRAY

Designed for automatic dispensing of detergent & additives as required which avoids manual
filling at each stage. The detergent dispenser tray should be filled with detergent & additives
before the start of a program. The tray has three chambers
1. Pre wash chamber: (Marked –I) To be filled with detergent in case a pre wash
program has been chosen.
2. Main wash chamber: (Marked –II) To be filled with detergent for every wash
program.
3. Fabric conditioner additive chamber:
only. It should be filled as per instructions mentioned in the topic "operation".
The detergent tray must be pulled out, filled as required and shut before the machine is switched
ON.
(Marked " ") To be used for additives
13
on
II
I