Page 10
Fan the sheets of paper to separate and prevent sticking. Open the paper-tray cover then load the paper, logo side down. Close the paper-tray cover then flip open the hinged section.
Page 11
To load the cartridge: Open the cartridge door. Rotate the cartridge spool clockwise just enough to remove the ribbon slack. IMPORTANT: Too many rotations may reduce the number of prints you can make. Insert the cartridge into the chamber until it clicks into place . Close the cartridge door.
Page 12
Open the paper-tray door. Slide the paper-tray into the paper-tray chamber until it snaps into place. (Make sure the hinged section is open). Paper light...
Page 15
Battery status light 8 hours for full refresh Battery light glows green when charging is complete .
Page 41
Push down on the connector-cover-release tab. Remove the connector cover and store it in a safe place. Snap the battery into place. Remove the battery and reattach the connector cover when the battery is not being used.
Need help?
Do you have a question about the EasyShare G600 and is the answer not in the manual?
Questions and answers