Pairing With Bluetooth Devices; Locating The Bluetooth Menu - Meelectronics Air-fi rumble AF80 User Manual

PAIRING WITH BLUETOOTH DEVICES

*** Your headset must be paired to a Bluetooth device before it can be used.
It is only necessary to pair your headset once with each device ***
1. Make sure the Air-Fi Rumble is turned off and within 1 meter of your device.
Press and hold the Multifunction (
you hear the headphone say "ready to pair, turn on Bluetooth, the pin code
is 0000". The status indicator light will flash red and blue in an alternating
pattern while the Air-Fi Rumble is in pairing mode. (Note: The Air-Fi Rumble
will enter standby mode if not paired within 10 minutes.)
2. Open the Bluetooth menu on the device you wish to pair (see Locating
the Bluetooth Menu section below for more details). Some devices
require you to select "search for devices" or "add new device" in order to
create a Bluetooth pairing.
3. Wait until you see "Air-Fi Rumble" on your device screen.
4. Select "Air-Fi Rumble" on your device and follow any further prompts to
pair. Use "0000" if a pin is required.

LOCATING THE BLUETOOTH MENU:

iPhone, iPad, and iPod touch
a) On your device, open the Settings menu
b) Select Bluetooth. If Bluetooth is not on, turn it on.
The iPhone/iPad/iPod will automatically search for new devices
Android™ Phones and Tablets
On your device, open the Settings menu
a)
b) Select Bluetooth (on older Android devices Bluetooth is found in
the Wireless & Networks menu). If Bluetooth is not on, turn it on.
Select "Search for Devices" if your phone or tablet does not
automatically search for new devices
Windows® Phone 8 devices
a) On your device, open the Settings menu
b) Select Bluetooth. If Bluetooth is not on, turn it on.
The phone will automatically search for new devices
Computers, Laptops, and Other Devices
Visit www.meelec.com/bluetooth for pairing, connecting, and setup
information.
If pairing fails after several tries, please refer to your device's user manual
for further information. Visit www.meelec.com/bluetooth for pairing videos,
troubleshooting, and additional information.
) button for about 6 seconds until
4