Getting Started; Finding A Location For Your Photo Printer - Kodak EasyShare 350 User Manual

1

Getting started

Finding a location for your photo printer

Place the photo printer on a flat, clean, dust-free surface, in a dry location, and
■
out of direct sunlight.
5 in. (12.7 cm)
■ Avoid areas where ventilation ducts, open doors, or frequent passersby might
expose the photo printer and paper to high levels of dust and debris. Airborne dirt
particles can affect picture quality.
■ Allow enough space on all sides of the photo printer to let you connect and
disconnect cables, change the cartridge, and add paper.
www.kodak.com/go/support
■ Allow at least 5 in. (12.7 cm) clearance from the
back of the photo printer for paper travel.
■ For proper ventilation, make sure the top and back
of the photo printer are not blocked.
■ When connecting power or USB cables, keep the
cables clear of the paper path to the front and rear
of the photo printer.
1