Summary of Contents for Weil-McLain Ultra 3 Series
Page 1
Gas-fired water boilers – Series 3 Featuring Flexibility Installation guide and material checklists Series 3 This guide must only be used by a quali!ed heating installer/service technician. Read all instructions, including the boiler manual and all other information shipped with the boiler, before installing. Perform steps in the order given. Failure to comply could result in severe personal injury, death or substantial property damage.
QUICK-START QUICK-START (Follow all instructions in Boiler manual) START-UP, ADJUST & TEST BEFORE INSTALLING . . . • Follow the boiler manual instructions to clean the system • Make sure there is enough clearance for the boiler and all if needed, then fill and check water chemistry. water, gas and air piping.
Page 3
Ultra-299, 399: 4” Sidewall D. V. Sidewall Direct Exhaust –or– Sidewall D. V. with Vertical D. V. Vertical (no air pipe) with Weil-McLain Sidewall Direct Vent with Separate Pipes Concentric Pipes Concentric Pipes Direct Exhaust (no air pipe) termination termination...
Page 4
IPEX System 636. When using IPEX kits, use only IPEX product code 196006 for 3” venting or IPEX product code 196021 for 4” venting. Sidewall with Weil-McLain Plate Contact Weil-McLain for ordering information and availability of Weil-McLain venting kits. • W-M sidewall term. kit 3"...
WATER PIPING MATERIAL CHECKLIST (see boiler manual for details) RETURN TO PAGE 2 S e n s Do not exceed 12 inches apart S y s t S e n s S y s t D H W G a s Optional Easy-Up Manifolds: 1¼”...
Ultra Gas boilers (antifreeze is available plete, pre-assembled boiler loop piping; 1¼” (383-500-649) from Weil-McLain) — Ask your Weil-McLain distributor for circulator shipped loose with boiler) — 1½” (383-500-661) information or visit us online at www.weil-mclain.com to 1¼”...
Need help?
Do you have a question about the Ultra 3 Series and is the answer not in the manual?
Questions and answers