Installation Of Lifeview Mvp; Setting Up Your Inputs - LifeView FlyTV Express M5 MST-T2 A2 User Manual

Installation

3.4 Installation of LifeView MVP

Install the LifeView MVP software by
clicking on LifeView MVP Setup. Just
follow the prompts to install the software.

3.5 Setting up your inputs

When loading the MVP for the first
time, the Device Configure window
will appear. Indicate what source you
have connected to each input; select
DVB-T for a digital antenna or Analog
TV for an analog TV antenna/cable.
Note: You cannot have an analog
source on RF1 if you are using
S-Video, and you cannot have an
analog source on RF2 if you are using
composite video(AV-In).
If you want to watch analog TV with S-Video, connect your Analog TV source to RF2.
If you want to watch analog TV with composite video (AV In), connect your Analog TV
source to RF1.
Also, if you select FM Radio, you cannot have Analog TV on RF2 or any analog inputs
selected (S-Video and/or composite video).
8