Marking The Scenes; Returning To The Scenes; Locating Desired Scene - Toshiba SD-63HK Owner's Manual

Marking the scenes

The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
1
Press MARKER during playback.
2 Select the blank Marker using
Then press ENTER at the desired scene.
• Repeat this procedure to set the other 2
scenes.
3 Press MARKER to remove this display.
Notes:
• Some discs may not work with the marking operation.
• The marking is cancelled when you open the disc tray or
turn the power off.
• Some subtitles recorded around the marker may fail to
appear.

Returning to the scenes

1
Press MARKER during playback or stop mode.
Press / to select the Marker 1 ~ 3.
2
3 Press ENTER.
Playback starts from the marked scene.
To cancel the mark
Press CANCEL in step 2.
• To remove this display, press MARKER.
2D20401A P24-31
Marker 1
Marker 2
Marker 3
/Enter/Cancel/Marker
/ .
Marker 1
00 27 54
Marker 2
Marker 3
/Enter/Cancel/Marker
Marker 1
Marker 2
Marker 3
/Enter/Cancel/Marker
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
/Enter/Cancel/Marker
27

Locating desired scene

Use the title, chapter and time recorded on the disc to
locate the desired playback point.
1
Press JUMP during playback.
Jump
2
Press or to select the "Time", "Title" or
"Chapter".
Jump
3 Press number buttons (0–9) to change the
number.
Jump
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
4
Press ENTER.
Playback starts.
• When you change the title, playback starts
from Chapter 1 of the selected title.
• Some discs may not be compatible with the
above operation.
26/9/03, 6:02 PM
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Time
Title
Chapter 12
/Enter/0 9/Cancel/Jump
27