Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ANTARIS SOLAR PV MODULES Series
- Page 1 ANTARIS SOLAR INSTALLATION & MAINTENANCE MANUAL FOR PV MODULES LIVING BY THE SUN!
-
Page 2: General Use
Photovoltaic Modules correctly & safely. If you have any questions, please feel free to contact the sale’s manager of ANTARIS SOLAR or our Customer Service. General use 1. -
Page 3: Installation
Transport and Carry 1. Carry the Modules carefully and handle them on respecting of instruction. 2. Keep the Modules away from inflammable gas, hazardous chemicals or fire source. 3. Do not carry wet Modules. 4. It is highly recommended to transport with container and the unfilled space (the gap over 20cm) shall be filled with inflatable bag;... - Page 4 9. Installation method and location Screw-fixing: fix the modules on the bracket on the bracket at 8 border prefabricated installation holes (Drawing 2). Standard installing hole installing hole for strong wind and heavy snow Drawing 2 Screw-fixing Fixture-fixing: Fix the module safely and effectively on the brackets with special installation tools a ) For a Series (156-72) modules, Six clamps must be used (Drawing 3) L/8 ≤...
- Page 5 a ) For other series module, fix the module with the long side (Drawing 4-a) or short side (Drawin 4-b) according to the bracket designation and mechanical load requirement. L/8 ≤ e ≤ L/4, a ≥ 6 cm 2400 Pa Drawing 4-a fixing on the long side for the other module series L/8 ≤...
- Page 6 w/8 ≤ e ≤ W/4, a ≥ 6 cm 5400 Pa Drawing 4-b fixing on the long side for the other module series Inserting System: Fx the module with U type groove or flange beam a ) All available installation method for A series modules (156-72) (Drawing 5) Drawing 5 fixing with sideway for A series modules ≥...
- Page 7 a ) For other series module, fix the module with the long side or short side according to the bracket designation and mechanical load requirement. (Drawing 6) 2400 Pa Drawing 6 fixing with sideway for the other module series 5400 Pa Drawing 6 fixing with sideway for the other module series 5400 Pa...
- Page 8 10. When installing the Modules on the roof, ensure there is an appropriate structure, and a suitable seal shall be made between the Modules and the bracket to prevent leaking. 11. Installing the Modules on the roof may affect the fire rating of the house which requires the construction organization to make more accurate assessment.
-
Page 9: Product Identification
Barcode: the barcode is in the internal of the Modules, which containing the relevant retrospect information of the Modules. Please do not remove any label, or ANTARIS SOLAR will not provide any warranty. Maintenance 1. -
Page 10: Annual Inspection
(including without limitation patent, copyright and trademark) or other rights of ANTARIS SOLAR, whether expressly or impliedly, is granted to customer because of use of modules. 3. All information stated in this manual is based on ANTARIS SOLAR’s knowledge and experience, but no warranty about such information (including modules specifications) is made by ANTARIS SOLAR, whether expressly or impliedly. - Page 11 ANTARIS SOLAR GmbH & Co. KG Member of: Head office 63735 Aschaffenburg, Germany Phone: +49 (0) 6095 950-441 Fax: +49 (0) 6095 950-544 Email: info@antaris-solar.com Internet: www.antaris-solar.com...
Need help?
Do you have a question about the PV MODULES Series and is the answer not in the manual?
Questions and answers