Table of Contents
Advertisement
Configuration Menu
Function
Operation
Direct Power On
Sleep Mode
Illumination
Trigger Out
High Altitude Mode
Menu/Settings
On, Off
Off, 5min., 10min., 20min.
On, Off
On, Off
On, Off
82
Explanation
You can set up the projector so that
projection starts as soon as the pow‐
er cord is plugged in without any
button operations.
Note that when this is set to On,
projection starts if power is restored
after a blackout or other power out‐
age and the power cord is still plug‐
ged into the projector.
If the set time is exceeded and no
signal is input, the projector is auto‐
matically turned off and enters
standby mode. When set to Off,the
projector never enters sleep mode.
When in standby mode, press the
button on the remote control or
the
button on the control panel
to start projection.
Set this to Off if the light from the
indicators on the control panel
bothers you when watching a mov‐
ie in a dark room.
Set the Trigger Out function to com‐
municate the projector's power on
status and so on to external devices.
When set to Off, no voltage is out‐
put from the Trigger Out port.
When set to On, voltage is output
from the Trigger Out port when the
projector is on.
If you change this setting, the new
setting will take effect the next time
you turn the projector on.
Set this to On if you are using the
projector above an altitude of 1500
meters.
Advertisement
Table of Contents
