Group 30 Electrical System—VNL, VNM
3638-03-02-01
Windshield Wiper Switch Re-
placement
(Includes checking switch function)
Removal
1
Make certain the vehicle ignition is
OFF before beginning this procedure.
2
Remove the 2 clips at the bottom of
the steering column cover.
3
Adjust the steering column up and to-
ward you, where possible. Remove
the front steering column cover by re-
moving the 3 torx bolts from the cover
and sliding the rubber grommets off of
the cover.
58
4
Adjust steering column forward and
up, where possible. Remove bolts from
rear column cover and remove cover.
5
W3000655
Disconnect electrical connector. Re-
move the torx bolts on each side of the
wiper switch and remove the switch.
W3000654
Service Procedures
W3000648
W3000652
Need help?
Do you have a question about the VNL and is the answer not in the manual?
Questions and answers
110 outlet dead were is the fuse