Install/Replace The Batteries Of Remote Control - Philips DCB8000 User Manual

Route audio input through the MP3
LINK socket
Connect an MP3 Link cable to:
‡ the MP3 LINK socket on this product.
‡ the headphone socket on the external
device (for example, MP3 player).
Connect power
Caution
‡
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the unit.
‡
Before you connect the AC power cord, make sure that
you have completed all other connections.
Connect the AC power cord to:
‡ the AC MAINS~ socket on this product.
‡ the wall power socket.
12 EN
Downloaded From Disc-Player.com Philips Manuals
Install/replace the batteries of
remote control
Note
‡
Risk of explosion! Keep batteries away from heat,
VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH
‡
Remove the battery if the remote control is not to be
used for an extended period of time.
1
Press and push the battery compartment
to slide it open.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Push and slide back the battery
compartment.