Williams WBC10 Operating Manual
Modular blast chillers, blast chiller freezers and blast freezers
Hide thumbs
Also See for WBC10:
- Operating & engineers manual (21 pages) ,
- Operator's manual (14 pages) ,
- Operating & engineers manual (15 pages)
Table of Contents
Advertisement
OPERATING and ENGINEERS MANUAL for
REACH-IN and MODULAR BLAST CHILLERS,
BLAST CHILLER FREEZERS and BLAST FREEZERS
This manual covers the Installation, Operation, Routine Maintenance and Cleaning
requirements for the following Williams Refrigeration products:
WBC/WBCF10
WBC/WBCF20
WBC/WBCF30
WBC/WBCF40
WBC/WBCF50
Provided the instructions in this Operating Manual are read and implemented correctly,
the optimum performance and reliability of your equipment should be maintained.
The Williams range of Reach-In Blast Chillers has temperature parameters set as follows:
+90°C (194°F) / +3°C (37°F)
The Williams range of Reach-In Blast Chiller Freezers has temperature parameters set as
follows:
+90°C (194°F) / +3°C (37°F) and +90°C (194°F) / -18°C (0°F)
The Williams range of Modular Blast Chillers, Chiller Freezers and Freezers are designed to
blast chill/freeze products:
WMBC
WMBCF
WMBF
Also designed to hold product at the following temperatures:
WMBC
WMBCF
WMBF
Declaration of Conformity References:
Low Voltage Directive 2006/95/EC
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2004/108/EC
Pressure Equipment Directive 97/23/EC
Waste Electrical and Electronic Equipment Directive (WEEE) 2012/19/EU
Restriction on Use of Certain Hazardous Substances Directive (RoHS2) 2011/65/EU
Refrigerant Designation
Global Warming Potential
HFC - R134a
HFC - R404a
Williams Refrigeration declares that all products manufactured by Williams Refrigeration
comply with the above directives as they apply to those products, and those products are
therefore declared to be in conformity with the provisions of the above legislation.
Model No.:
Serial No.:
WMBC/WMBCF90
WMBC/WMBCF120
WMBC/WMBCF160
WMBC/WMBCF200
WMBC/WMBCF240
WMBC/WMBCF320
+90°C (194°F) / +3°C (37°F) in 90 minutes or less
+90°C (194°F) / +3°C (37°F) in 90 minutes or less
+90°C (194°F) / -18°C (0°F) in 240 minutes or less
+90°C (194°F) / -18°C (0°F) in 240 minutes or less
+3°C (37°F)
+3°C (37°F) (blast chill cycle) or -18°C (0°F) (blast freeze cycle)
-18°C (0°F) (blast freeze cycle)
1300
3260
WMBF100
WMBF200
CFC Free Refrigerant
J1BC
WBC70
Advertisement
Table of Contents
Related Manuals for Williams WBC10
Summary of Contents for Williams WBC10
- Page 1 The Williams range of Reach-In Blast Chiller Freezers has temperature parameters set as follows: +90°C (194°F) / +3°C (37°F) and +90°C (194°F) / -18°C (0°F) The Williams range of Modular Blast Chillers, Chiller Freezers and Freezers are designed to blast chill/freeze products: WMBC +90°C (194°F) / +3°C (37°F) in 90 minutes or less...
- Page 2 Do not block vents by recommend that should the plug or cable fail contact stacking boxes on top or in front of unit as this could Williams spares office for a replacement part. affect performance. Roof mounted pod storage refrigeration systems require WBC/WBCF30 &...
- Page 3 Chilled foods can be stored for up to 5 days at between Williams range of Blast Chillers feature the option of soft 0°C (32°F) and +3°C (37°F). and hard facility on blast chill offering flexibility and...
- Page 4 should be reduced. You may find it necessary, there- If no button is pressed for 10 seconds or if is pressed fore, to experiment with different amounts of food at any time the cabinet returns to normal store mode. and loading methods in order to achieve the optimum performance with your blast chiller/freezer.
- Page 5 probe fails, the cycle will continue until the last working ALARMS probe reaches temperature. When a fault or adverse operational condition arises, an - Mains failure longer than 3 minutes. audible and visual alarm will be initiated: General alarm in left window / right window will The LED’s beneath the right-hand display window show mode (storage temperature/blast or indicate whether or not each enabled food probe has...
- Page 6 THERMOSTATS AND PROBES Thermostats AIRFLOW The controller can, via the set of thermostat parameters, In the unlikely event that your blast chiller is taking longer control the refrigeration for soft blast chill, hard blast chill to perform it’s chilling cycle, ensure that the system is op- and chill store.
- Page 7 ENGINEERING PARAMETERS 90°. The shelf support will be released. (Note: the sup- The engineering parameters are accessed by pressing ports are designed to be anti-tilt and you may therefore and holding button for 5 seconds, whilst in the standby experience some resistance at first which will be over- mode.
- Page 8 If there are further grease deposits still remaining on the condenser call your Service Provider to carry out a full service. Note: Non-compliance may invalidate your Warranty. Top Mounted Cabinets (WBC/WBCF50) The condensing unit and refrigeration equipment can be accessed from above or in some cases behind. Remove the screws in the top and bottom edge of the unit cover and pull the unit cover away from the cabinet and retaining clips.
- Page 9 Sales Tel: +44 1553 817000 Fax: +44 1553 817111 Spares Tel: +44 1553 817017 Fax: +44 1553 817020 Email: info@williams-refrigeration.co.uk Website: www.williams-refrigeration.co.uk WILLIAMS SILVER FROST 2 rue Conventionnel Huguet 23000 GUERET France Tel: +33 5 55 52 27 88 Fax: +33 5 55 62 10 61 Email: info@williams-silverfrost.com...
Need help?
Do you have a question about the WBC10 and is the answer not in the manual?
Questions and answers