Vid Vision II Quick Start Manual page 2

Connect the included USB cable directly to the USB port on your
computer. Make sure your computer is powered on.
other end of the USB cable to your VidVisionII Glasses. A blinking
red light will indicate that the battery is charging.
for a minimum of 3 hours. (until the green indicator turns on)
Note: Please do not use a wall outlet or other devices to charge
the VidVisionII sunglasses product. It could result in a faulty charge
of the battery and void warranty.
After turning on your VidVisionII Glasses press
illuminate indicating recording has started, hit
recording. If you do not see a blue light the glasses are
Check the battery power. Recharge the battery if the power exhausted.
Please check if the memory is full. Delete or copy the old video files to
your computer hard disk.
Check the battery power. Recharge the battery if the power exhausted.
If auto shut-off on Video Recorder mode, check if the memory is full.
Delete or copy the old video files to your computer hard disk.
DO NOT return this product to the place of purchase. Call the VidVision support line for assistance.
Press one time to take a photo. You can take photos durning video
Connect the recoding, or take photos during standby mode.
Allow to charge
USB PORT
Connect VidVisionII to your computer. The device appears as a USB mass
storage device in Windows Explorer. Open the HD VIDEO folder in the
storage device, copy or cut the video files to your local hard disk. Play the
videos with "Windows Media Player" or other supported media player.
Although VidVisionII glasses record in HD resolution the video quality is limited
and a blue light will
to your computer's resolution. To see your recording in HD you must play the
again to stop
video on a HD compatible device. For optimal performance save video and
NOT recording.
photos to your computer before viewing.
Check if the USB connection is fine. If the blue indicator turns on, You
may have pressed
Press button again to switch to mass storage device mode.
Most problems can be solved by resetting. Simply reset the VidVisionII.
• Resetting will not erase the pictures, videos or other files stored in
memory.
• If the reset procedure does not work, charge the battery and try again.
USB PORT
and switched VidVision to Web Camera mode.
The Web camera function will require you to download a driver found in
the VidVisionII file that pops up when you plug the glasses into your
computer.
1. Connect VidVisionII to your computer. The USB mass storage device
appears in Windows Explorer. Press
The blue indicator turns on.
2. Press again to return to USB mass storage device mode.
Note: Video Recorder mode are
USB PORT
not usable in USB connection status.
Connect your VidVisionII glasses to your computer then find and open the
"updatetime" folder in the glasses memory. Follow the instructions to run
the "updatetime.exe" program to update the time on your VidVisionII
glasses.
VidVision II USB Cable
Carrying Case Quick Start Guide
to enter Web Camera mode.
Web camera feature is not
available for Mac computer.
Carrying & Cleaning Bag