About Your Camera
Camera Straps
Attaching the Neck Strap
Attaching the Hand Strap
2-24
A neck strap and a hand strap are included with your camera. You can
attach either or both.
• Slide the Viewfinder cap (see
the ends of the neck strap through the camera strap eyelets. Pull firmly
on the strap to make sure it is held securely by the buckles.
1. Thread the strap through both loops in the hand strap pad.
2. Place the three-holed buckle on the strap and thread through the
camera's top strap eyelet.
3. Thread the other end of the strap through the camera's bottom strap
eyelet.
4. Thread the top strap back through the buckle as shown.
5. Thread both ends of the strap back through the loops on the hand
strap pad.
6. Place the two-holed buckle on the top strap.
7. Tuck the top strap through the bottom loop in the hand strap pad.
8. Thread the bottom strap through the two-holed buckle as shown.
9. Tuck the bottom strap through the top loop in the hand strap pad.
page
2-23) on the neck strap then thread
April 28, 2004
Need help?
Do you have a question about the 6B8773 and is the answer not in the manual?
Questions and answers