Use The Extender In Access Point Mode - NETGEAR WN3100RPv2 Quick Start Manual

Use the Extender in Access Point Mode

You can use the extender as a WiFi access point, which creates a new WiFi
hotspot by using a wired Ethernet connection.
1. Plug the extender into an electrical outlet.
Wait for the Power LED
Power LED does not light, slide the Device On/Off switch on the side
of the extender to the On position.
2. Use an Ethernet cable to connect the extender to the router Ethernet
LAN port or the remote Ethernet LAN jack with LAN access.
The extender joins the LAN and creates a WiFi hotspot.
to light amber and turn green. If the
12