Table of Contents
Advertisement
Quick Links
X
-COLOR LED
User Instructions
1/09
PLUS
American DJ
®
6122 S. Eastern Ave.
Los Angeles CA. 90040
www.americandj.com
X-Color LED GP™
Unpacking: Thank you for purchasing the X-Color LED GP™ by
American DJ®. Every X-Color LED GP™ has been thoroughly tested
and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully
inspect your fixture for any damage and be sure all equipment
necessary to operate the unit has arrived intact. In the event
damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Please
do not return this unit to your dealer without contacting customer
support first.
Introduction: The X-Color LED GP™ is a three channel DMX
intelligent, color changing LED fixture with a static gobo. The
X-Color LED GP™ can operate as a stand alone fixture or in a
Master/Slave configuration. The X-Color LED GP™ is a sound active
fixture, but it can also be controlled via DMX. For best results use
fog or special effects smoke to enhance the beams projections.
Customer Support: American DJ® provides a toll free customer
support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation.
You may also visit us on the web at www.americandj.com for any
comments or suggestions. Service Hours are Monday through
Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking
directly into the light source at all times!
American DJ
- www.americandj.com - X-Color LED GP™ Instruction Manual Page 2
®
General Information
Advertisement
Table of Contents
Related Manuals for ADJ X-COLOR LED PLUS
Summary of Contents for ADJ X-COLOR LED PLUS
- Page 1 X-Color LED GP™ General Information Unpacking: Thank you for purchasing the X-Color LED GP™ by American DJ®. Every X-Color LED GP™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping.
-
Page 2: General Instructions
X-Color LED GP™ Safety Precautions X-Color LED GP™ General Instructions To optimize the performance of this product, please read these For Your Own Personal Safety, Please Read and Understand This operating instructions carefully to familiarize yourself with the basic Manual Completely Before You Attempt To Install Or Operate operations of this unit. - Page 3 Data Cable (DMX Cable) Requirements (For DMX unit in your daisy chain to terminate the line. Using a cable terminator and Master/Slave Operation): The X-Color LED (ADJ part number Z-DMX/T) will decrease the possibilities of erratic GP™ can be controlled via DMX-512 protocol. The behavior.
-
Page 4: System Menu
X-Color LED GP™ Set Up X-Color LED GP™ System Menu 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting stan- dard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. - Page 5 X-Color LED GP™ System Menu X-Color LED GP™ System Menu SLND - This will let you set unit as a slave in a master/ DOWN buttons to select “ON” to keep the LED display on at slave configuration. all times, or “OFF” to switch to have the LED display switch off after 10 seconds.
-
Page 6: Operation
X-Color LED GP™ System Menu X-Color LED GP™ Operation Operating Modes: The X-Color LED GP™ can operate in three exit different modes. This next section will detail the differences in RSET the operating modes. - Use this function to reset the unit. •... - Page 7 X-Color LED GP™ Operation X-Color LED GP™ DMX Traits Master-Slave Operation (Sound Active): Channel Value Function This function will allow you to link up to 16 units together and operate without a controller. The COLORS units will be sound activated. In Master-Slave operation one unit will 0 - 14 WHITE act as the controlling unit and the others will react to the controlling...
-
Page 8: Gobo Replacement
X-Color LED GP™ Gobo Replacement X-Color LED GP™ Fuse Replacement The X-Color LED GP™ comes with a replaceable gobo. This gobo Locate and remove the unit’s power cord. Once the cord has been can be interchanged at any time and allows you to customize your removed located the fuse holder located inside the power socket. -
Page 9: Warranty
X-Color LED GP™ Warranty X-Color LED GP™ Notes MANUFACTURER’S LIMITED WARRANTY American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. -
Page 10: Specifications
X-Color LED GP™ Specifications Model: X-Color LED GP™ Voltage*: 100 ~ 240V 50Hz/60Hz “Auto Sensing” LED: 1 x 20W Power Consumption: Beam Angle: 13 Degrees Dimensions: 7.87”(L) x 6”(W) x 6.7”(H) 194mm x 200mm x 197mm Colors: 8 Colors + White Weight: 5.3 Lbs.
Need help?
Do you have a question about the X-COLOR LED PLUS and is the answer not in the manual?
Questions and answers