Chapter B3 Programming The Nx-1048 Keypad; Overview - GE NetworX V3 Installation Manual

152
NetworX Version 3 Installation Manual
Chapter B3 Programming the NX-1048
keypad

Overview

Each NX-1048 keypad has a sounder and an LCD display that displays messages in a number of
possible languages.
Each NX-1048 keypad must be enrolled, defaulted to the country settings for the selected country
and defaulted to the factory defaults before starting to program the system. For more information on
enrolling and defaulting, see Chapter B7 Enrolling modules. For step-by-step instructions concerning
the very first wireless keypad installation, see the Wireless keypad learning-in procedure section, and
for instructions about installing additional wireless keypads, see the Learning-in additional wireless
keypads section.
To program the current keypad, select Installer Menu>This Keypad.