Technoline WS 8005 Manual

Technical data:

DCF-77 Radio controlled Clock
Time in 12/24 hour format
Manual time setting option
Time Zone setting: -12/+12h
Continuous calendar up to year 2054
Date and weekday display
Temperature display in °C or °F
Weekday display in seven languages: English, German, Italian, French, Danish, Dutch, Spanish
Snooze function
Thermometer: Indoor measurement ranges: -9.9°C ~ 59.9°C
Battery: 1.5V "AA" size x 2pcs (not included)

Important information:

When you insert the batteries all the symbols on the display will briefly light up and you will hear a signal tone, LCD
full display for 2 seconds with beeping, then enter RCC reception for seven minutes.
If this automatic setting process is unsuccessful, then use a sharply pointed instrument to press the Reset button
on the rear side of the clock.

Manual time setting:

Press and hold down the "SET" button for 2 seconds, the 12/24 hour mode display starts to flash. Now use "▲"
and "▼ "buttons to set the correct 12/24 hour mode.
Press "SET" to confirm your setting, the offset display starts to flash. Now use "▲" and "▼"buttons to set the correct
time zone.
Press "SET" to confirm your setting, the Hour display starts to flash. Now use "▲" and "▼"buttons to set the correct
hour.
Press "SET" to confirm your setting, the Minute displays starts to flash. Now use "▲" and "▼"buttons to set the
correct minute.
Press "SET" to confirm your setting, the Year display 2004 starts to flash. Now use "▲" and "▼" buttons to set the
correct year.
Press SET to confirm your setting, the Month display starts to flash. Now use "▲" and "▼" buttons to set the
correct month.
Press "SET" to confirm your setting, the Date display starts to flash. Now use "▲" and "▼" buttons to set the
correct date.
Press "SET" to confirm your setting, the language selection for the Weekday displays starts to flash. Now use "▲"
and "▼" buttons to select a language.
Press "SET" to confirm your setting and to end the setting procedures, enter the clock mode.
Info:
After 30 seconds without pressing any button, the clock switches automatically from set mode to normal time
mode.

Setting the daily alarms:

To view the set alarm times, under the clock mode, press once ALARM button, LCD displays the "
Press and hold down the ALARM button for 2 seconds until Alarm Time flashing icon is displayed. Now use the "▲"
and "▼" buttons to select the alarm time you require and briefly press the ALARM button to set this Alarm time.
The Hour display of the Alarm time starts to flash. Use the "▲" and "▼"buttons to set the required hour. Press
WS 8005 Manual
" icon.