Configuring The Upnp Settings - Asus DSL-N10S User Manual

Configure the SNMP settings
This page allows you to configure the SNMP (Simple Network Management
Protocol) settings.
To configure the SNMP settings:
1. Click Access Management > SNMP tab.
2. Tick Activated to enable SNMP.
3. Key in the trap host.
4. Click Save when done.

Configuring the UPnP settings

The UPnP (Universal Plug and Play) Configuration page allows you to access the
media of the UPnP devices found in your network.
To configure the UPnP settings:
1. Click Access Management > UPnP tab.
2. In the UPnP field, tick Activated to enable UPnP connection.
3. In the Auto-configured field, tick Activated to enable auto-configuration.
4. Click Save to save the settings.
Chapter 4: Configuring via the web GUI DSL-N10S 31