2. Lower the seatback.
3. Remove the locking strap.
4. Remove the bolt.
5. Remove the jack.
Spare Wheel
Note: The spare wheel is located
underneath the rear of the vehicle.
1.
Assemble the handle.
Ranger (TKE) Vehicles Built From: 01-10-2014, DB39120609AD (CG3575en) enGBR, Edition date: 09/2014, First Printing
Wheels and Tires
2. Fully insert the jack handle into the
3. Pass the bracket and cable through the
Jacking and Lifting Points
177
guide hole. Turn counter-clockwise
until the wheel rests on the ground, and
there is slack in the cable.
wheel opening.
WARNING
You must use the specified jacking
points.
Need help?
Do you have a question about the RANGER and is the answer not in the manual?
Questions and answers