Vehicle Jack; Jacking And Lifting Points - Ford FOCUS Owner's Manual

4. Unfold the vehicle jack handle and the
hexagonal end into the correct position
prior to use. Use the hexagonal end to
operate the vehicle jack screw and to
remove the lug nuts.
Note: Use the hook at the hexagonal end
to remove the wheel trim.
Vehicles Without a Spare Wheel
Vehicles without a spare wheel are fitted
with a temporary mobility kit. See
Temporary Mobility Kit (page 219).
Focus (CB8) Vehicles Built From: 03-03-2014, Vehicles Built Up To: 31-12-2014, CG3568en enGBR, Edition date: 03/2014, None
Wheels and Tires

Vehicle Jack

situations.
free from foreign matter.
vehicle.
minimum diameter of 3 in (80 mm).
It is recommended to use a workshop type
hydraulic jack for changing between
summer and winter tires.

Jacking and Lifting Points

suspension, engine, braking system or the
fuel lines.
227
WARNINGS
The vehicle jack supplied with your
vehicle should only be used when
changing a wheel in emergency
Before using the vehicle jack, check
that it is not damaged or deformed
and that the thread is lubricated and
Never place anything between the
vehicle jack and the ground, or
between the vehicle jack and the
You must use a vehicle jack with a
minimum lifting capacity of 1.5
tonnes and a lifting plate with a
WARNING
Use only the specified jacking points.
If you use other positions, you may
damage the body, steering,