Lemptying The Dust Case; Checking The Max Line; X96;Detaching The Dust Case - Hitachi PV-XA100 Instruction Manual

How to clean
Note
l When using the multi angle brush nozzle, do
not let it fall from high places or add excessive
force in the direction of the arrow in
so may result in damage.
l You can wash the multi angle brush nozzle with
water. After washing, thoroughly air dry before
use. Vacuuming water may result in damage.
l If fibrous dust clogs the end or interior of the multi angle brush nozzle, suction power is reduced, so remove the
dust.
Emptying the dust case
l Cyclonic cleaners have the advantage of not requiring paper bags, but to clean with high
suction power, we recommend frequent disposal of dust and filter maintenance.
Note l Fine dust may disperse in the air when emptying the dust case.
Empty the dust case in a well-ventilated environment such as outdoors, or wear a mask and avoid
breathing in the dust.

Checking the Max line

Note
l If you vacuum dust after exceeding the "Max line", the dust will spill from the inlet of the dust case. To
clean with high suction power, we recommend frequent disposal of dust.
l When you complete cleaning, stop operation and check
the "Max line".
l Empty the dust case before exceeding the "Max line".
Detaching the dust case
Detach the handy cleaner from the stick cleaner. (P.E-9)
Hold the dust case and handy cleaner, and remove
while pressing the dust disposal button.
CAUTION
E-12
A
. Doing
Risk of injury or damage to the floor.
l Pressing the dust disposal button while
not holding the dust case will cause the
dust case to fall.
Dust case
Dust disposal button
Dust case
Max line