Deleting Commands - Silvercrest URC 101 DT Operation And Safety Notes

Deleting commands

Deleting commands from only one source button
Hold down the setup button (17)
seconds until
Press the setup button (17)
bring up the
Press OK (12)
Select the
buttons (13)
Select the source button (2) from which you wish to
delete a command.
Confirm the subsequent request
(12) .
The message
The remote control will then revert back to normal use.
Deleting commands from all source buttons
Hold down the setup button (17)
seconds until
menu.
to bring up
menu using the navigation
and press OK (12)
will appear shortly after each other.
is shown.
three more times to
and the confirmation
is shown.
for about 3
.
.
with OK
for about 3
53