3.
Remove the VGA/USB board from the top cover (3).
Reverse this procedure to install the VGA/USB board.
Heat sink
NOTE:
The heat sink spare part kit includes replacement thermal material.
Description
For use only on HP EliteBook 740/840/HP ZBook 14 models with discrete graphics
For use only on HP EliteBook 740/840/HP ZBook 14 models with UMA graphics
For use only on HP EliteBook 750/850 models with discrete graphics
For use only on HP EliteBook 750/850 models with UMA graphics
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Service cover (see
b.
Battery (see
c.
Fan (see
82
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page
53)
Fan on page
79)
51)
Spare part number
730962-001
730963-001
732626-001
730815-001