[Type text] Electric Stove Fire 9856 Instructions INSTRUCTIONS FOR USE All our heaters are designed to meet the most stringent quality, performance, and safety requirements. This product manual aims to improve your understanding and appreciation of your new heater, by providing simple and informative instructions which enable you to install it and to ensure that you benefit from the excellent performance and features it has to offer.
SAFETY INSTRUCTIONS WARNING - to reduce the risk of fire, electrical shock or injury to persons or property, when using any electrically powered product, basic safety precautions must always be followed as below: Before you connect the fireplace heater to the main supply. Make sure that the voltage indicated on the rating plate.
[Type text] Electric Stove Fire 9856 Instructions Never route the power supply cord under carpet etc. Never install the heater close to curtains or combustible materials. Never use the heater to dry clothes, etc. Never sit or stand on the heater.
Page 4
PLACEMENT This free-standing heater is designed to be placed on a hard, level surface. When positioning, please keep the following points in mind: If you are placing the heater in an alcove, make sure that there is at least 150mm of space on all sides to ensure good air circulation ...
[Type text] Electric Stove Fire 9856 Instructions Location of Controls The following switches are located under the controls cover, on the front of the heater. 1. Thermostat control knob - Adjust to maintain room temperature (Cycles between 900 and 1800W) 2.
AUTOMATIC CUT-OFF A cut-off switch is fitted to the heating element to prevent damage due to overheating. If it cuts- off due to an obstruction in the airflow, the heater must be allowed to cool for 15 minutes and the obstruction must be removed before restarting. Notice: Heater will only work if fan switch is on and thermostat is set above current room temperature.
Page 7
[Type text] Electric Stove Fire 9856 Instructions CLEANING AND CARE Before cleaning, always remove the plug from the electrical socket. Ensure that the unit is cool enough to work on. Do not use harsh chemicals or solvents to clean this product and avoid using abrasive cleaning agents.
WARNING: THIS APPLIANCE MUST BE EARTHED. If a 13A (BS1363) fused plug is used it must be fitted with a BS1362 13A fuse. If in doubt consult a qualified electrician. EC DECLARATION OF CONFORMITY We the Enterprise Department Ltd of 11 Bridge Street, Bishops Stortford, Hertfordshire, UK, CM23 2JU in accordance with the following Directives: Electromagnetic Compatibility 2004/108EC...
Page 9
[Type text] Electric Stove Fire 9856 Instructions Packaging • Dispose of packaging at your local recycling centre. • Dispose of paper and carton separately from plastic bags at your local recycling centre. • Dispose of item at the end of its lifespan at your local authorised household waste recycling centre.
Need help?
Do you have a question about the 9856 and is the answer not in the manual?
Questions and answers