Basics
Charging the battery
Before using the Stereo Bluetooth® Headset SBH60 for the first time, you need to
charge it for approximately 1 hour. Sony chargers are recommended.
To charge your headset
1
Plug one end of the USB cable into the charger.
2
Plug the other end of the cable into the Micro USB port of your Stereo
Bluetooth® Headset SBH60.
3
After your headset is fully charged, the notification light turns to green.
Turning the headset on and off
To turn on the headset
•
Press and hold down the Power key until a white notification light flashes once.
To turn off the headset
•
Press and hold down the Power key until a white notification light flashes
rapidly three times.
Adjusting the volume
To change the call or music volume
•
During a call, or when listening to music, press the Volume key up or down.
Resetting and restarting
You can reset your Stereo Bluetooth® Headset SBH60 to its factory default settings.
This action, which deletes all pairing-related data on your headset, is sometimes
necessary if your headset stops functioning properly.
You can also force your Stereo Bluetooth® Headset SBH60 to restart in situations
where it hangs or does not restart normally. When you force your headset to restart,
no pairing data is deleted.
This is an Internet version of this publication. © Print only for private use.
5