Page 3
• Consult the dealer or an experienced radio/TV technician for help. FCC WARNING Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other applicable EU directive requirements.
Contents Introduction About your Bose Bluetooth Audio adapter ........... 5 ® ® System features ..................... 5 Unpacking ....................... 5 Setup Connecting the adapter to your audio sytem ..........6 Option 1: optical cable ..................6 Option 2: 3.5 mm audio cable ..............7 Option 3: 3.5 mm female to RCA cable ............
Power supply adapters ( included in certain regions) Note: If part of the system is damaged, do not use it. Contact your authorized Bose dealer or Bose customer service. Refer to the contact sheet in the carton. English - 5...
Setup Connecting the adapter to your audio system Connect the adapter to your system using a provided cable. Refer to your audio system owner’s guide to choose the best cable for connecting sources. Note: Do not make more than one audio connection. Option 1: optical cable The optical cable is the preferred connection to your system.
Insert one end of the 3.5 mm audio cable into the AUX OUT connector on the adapter. Insert the other end into a 3.5 mm AUX IN connector on your system. Option 3: 3.5 mm female to RCA cable Use this connection method for the Bose Solo, Bose Solo 10, Bose Solo 15 and ®...
Solo 10 systems ® Connect your system with the 3.5 mm female to RCA cable. See “Option 3: 3.5 mm female to RCA cable” on page 7. For the Bose Solo 15 system: See “Selecting the Bose Bluetooth Audio ® ®...
Remove an adapter by pressing back on the release (A) and lifting the adapter up and off (B). The adapter is in discoverable mode (the indicator blinks blue) once it is powered. Completing source setup After powering the Bose Bluetooth Audio adapter, You may need to set it up as a ® ®...
Operation Select the Bose Bluetooth Audio adapter ® ® You may have to change the source input to the one the Bose Bluetooth Audio ® ® adapter is connected to on your audio system. Refer to your audio system owner’s guide for more information on selecting sources.
The Bluetooth indicator blinks blue. On your mobile device, turn Bluetooth on. Select Bose Bluetooth Audio Adapter. Note: Some devices may require a passcode. Enter 0000 if prompted. When pairing is complete, the indicator glows solid white.
® er, and the adapter becomes discoverable. To pair additional devices see “Pairing a mobile device” on page 10. To re-pair a deleted device: Clear the Bose Bluetooth Audio Adapter from your mobile device’s Bluetooth list. Press on the adapter.
Failure to register will not affect your limited warranty rights. The warranty information provided with this product does not apply in Australia and New Zealand. See our website at www.bose.com.au/warranty or www.bose.co.nz/warranty for details of the Australia and New Zealand warranty. English - 13...
Need help?
Do you have a question about the Bluetooth Audio adapter and is the answer not in the manual?
Questions and answers