Scanning Stored Channels - Uniden UBC125XLT Owner's Manual

SCANNING STORED CHANNELS

Press Scan to begin scanning channels.
The scanner scans through all unlocked channels in the enabled
banks in channel order. When the scanner fi nds a transmission,
it stops on it.
When the scanning of all normal banks ends, the scanner
scans a channel storage bank that is named Close Call Hits (if
enabled). This is a storage bank that automatically stores found
frequencies with any Close Call mode. You will see Close Call
Hits on the display. If the Close Call Hits bank is empty, the
scanner does not scan this bank.
In Scan mode, the upper line displays the current channel bank
number and the lower line displays and scrolls SCAN from right
to left with the direction indicator (↑or ↓).
Enabled scan banks appear on the lowest line. Disabled scan
bank numbers are not displayed. The currently scanned bank
number fl ashes.
• You can turn scan banks on/off by pressing 1-9 or 0, but one
scan bank must always be enabled. If you turn off all scan
banks, the scanner will display Nothing to Scan. You can
turn Close Call Hits bank on/off by pressing . Clr.
• If you want to change the search direction or if it is a long
transmission and you want to continue scanning, turn the
SCROLL CONTROL or press Scan.
When the scanner fi nds a transmission, it stops on it. When the
transmission ends, the scanner resumes scanning according to
the delay setting for each channel.
41