BenQ E24-5500 Service Manual page 36

HDMI Scan Info
Shop
E-sticker
Demo
Parental
Reset Default
Software Version
Available OSD options may vary depending on the model you purchase and may be changed for further
improvement without prior notice.
Time-shift
Time-shift is a convenient tool for you to record the current program shown on TV if you need to be away from the
TV for a while:
1. While you are watching a digital TV channel, plug a USB device into the USB port of the TV.
2. Press on the remote control to start Time-shift recording. If this is the first time you use the USB device,
the TV will perform the following tasks (please follow the on-screen instructions):
• Detects whether the available empty space is more than 1GB and the USB transmission speed is at least 5. 0
MB/sec.
• Formats the USB device at your choice. If you choose not to format the USB device, all current data on the USB
device will not be removed.
3. If all the above conditions are met, the TV will then start time-shift recording automatically.
4. Once you are back, press
rewind/forward at the speed (2X, 4X, 8X, 16X, or 32X). (Press
/ to move forward/backward playback a little.
5. To exit time-shift playback, press
device.
• The USB device must be in the FAT32 file system. Plus, transmission speed of the USB device must be at
least 5.0 MB/sec and the available empty space should be at least 1 GB.
• Once the USB device is full during time-shift recording, time-shift recording will stop automatically.
Viewing images/videos or listening to the music
If you have images, videos, or music stored in a USB device, you can view/ listen to them on the TV:
Sets underscan or overscan info to avoid possible black border on the screen when
HDMI is use.
• On: sets to the Shop mode.
• Off: sets to the Home mode (less power consumption).
Displays BenQ TV features.
When the Shop mode is on, turning on the Demo mode displays a second screen
showing color enhancement effects.
Helps concerned parents control the access (such as limited time and channels) to the
TV.
Restore all settings to their default values.
The TV channel memory will not be cleared. That is, you do not need to scan and
store the TV channels again after reset.
Displays the current TV firmware version information.
to start time-shift playback. You can press ◄or► on the remote control to fast
. Note that all recorded videos will be automatically removed from the USB
to resume playback.). Also, you can press
36