HIKVISION DS-2CD2412F-I Quick Operation Manual page 7

Network Camera·Quick Operation Guide
No.
5
6
7
8
9
10
11
12
To reset the default parameters to the camera, you need to

press and hold the RESET button and power on the camera.
After the power on of the camera, you must still press and hold
the Reset button for about 10 seconds.
The WPS button is an easy configuration protocol of Wi-Fi

settings. Press the WPS button on the camera and press the
Status: Reserved
Link:
Flashing amber when network
connection is functioning properly;
Unlit when no network connection;
10M / 100M self-adaptive Ethernet interface & PoE
WPS (Wi-Fi Protected Setup)/Reset Button
Alarm Input Interface
Alarm Output Interface
Power supply interface; (DC 12V)
6
Description
Infrared Light
SD Card Slot
Ground