Yamaha YSP-300 Owner's Manual page 26

|PI,IIIII_'I(I,III _
For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this
unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB
OPTICAL DIGITAL INPUT jack on this unit.
For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD
for easy viewing when you adjust the system parameters in SET MENU.
To prevent the optical cable from being unplugged, affix the optical cable ill the supplied cable clamp (see page 20).
• If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals
input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO
INPUT jacks.
• Even if you connect your TV and this unit via the HDM[jack, you need to connect the video input jack on your TV to the VIDEO
OUT jack on this unit in order to display the OSD of this unit.
Rear panel of this unit
(U.S.A. and Canada models'
ANTENNA =1r' AUDIO INPUT "-i "= OUT"= I
0 I
DOCK |AUX! ITV/STBI !!!W!O!!!I
I I
.®,®
Analog Video
audio input
output
DIGITAL INPUT 7
UX 2 DVD|
COAXIAL ®/
OPTICA[ _ I
I ox,
I
l
h--
[] ®
XM
IR IN
Optical
digital
output
TV
0SD video pin cable Audio pin cable
Optical cable
22
En