3rd Party CTI IP Address
Using R2 System software and Version 2.00 of SV9100 PC Programming it is possible to see the
IP address of the PC that is running 3
Party TAPI driver. As only one PC can be connected to the
rd
SV9100 at any one point in time, this can be particularly useful for an installer who could be
trying to determine which PC was running the 3
Part TAPI driver and was connected the
rd
SV9100.
PRG command 20-23-06 can be used to see the IP address of the PC running the TAPI driver.
Outlook Dialing Rules
In order to dial out directly from Outlook on a pc with the TAPI client enabled, the numbers
should be stored in canonical format. Further information on storing numbers in canonical
format, see KB318575 for further details. (http://support.microsoft.com/kb/318575)