Card Reader - HP EliteDesk 800 G1 Tower Service Manual

Card reader

Description
Card reader, UHS-I
Card reader, UHS-II
The card reader is secured to the front right corner of the chassis.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Remove the optical drive
5. Remove the hard drive
6. Remove the drive cage
7. Disconnect the cable from the system board connector labeled MEDIA.
8. On the outside of the chassis, remove the one Torx screw that secures the card reader to the
chassis.
166 Chapter 7 Removal and replacement procedures: Ultra-slim Desktop (USDT)
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 143).
(Removing the optical drive on page
(Hard drive on page 154).
(Drive cage on page 164).
142).
151).
Spare part number
716390-001
736299-001
141).