Remote staRt oWNeR’s guide inTRoDuCTion Congratulations on your purchase of a Kia Remote Start System with Deluxe Vehicle Security featuring PowerCode Technology . This easy-to-use manual details the operating instructions and benefits of the Remote Start System with Deluxe Vehicle Security. Should you have questions or concerns regarding this system that this manual does not address, please contact your local Kia dealer.
STeeRing Wheel / STalK / Panel noTeS Press for Progressive Carfind ® x1= 5 Soft Chirps Press to aRM the Security System x2= 5 louder Chirps x3= 5 full Volume Chirps and loCK the doors. Press and hold for Personal Protection alarm.
STeeRing Wheel / STalK / Panel feaTuReS anD benefiTS of The ReMoTe STaRT SySTeM WiTh Deluxe VehiCle SeCuRiTy Remote-Start - Start your vehicle with the press of a button. Preheat or precool the vehicle’s interior. • • Remote Keyless Entry - lock and unlock the vehicle’s doors and tailgate. • All Vehicle Entrances are Protected - opening any entrance protected by the security system immediately sounds the vehicle’s horn and flashes the hazard or parking lights.
STeeRing Wheel / STalK / Panel ReMoTe ConTRol oPeRaTion Your Remote Control Transmitter The remote control keyless entry transmitter controls the arming and disarming functions of the security system, as well as remote start, car finder and panic. The system is armed when the doors are locked with the remote control transmitter. The system is disarmed when the doors are unlocked with the remote control transmitter.
STeeRing Wheel / STalK / Panel uSing The ReMoTe STaRT funCTion Starting Your Vehicle The remote start function is activated by pressing the button followed by pressing the button within 3 seconds on your remote control transmitter. The system will check the vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine will start within 5 seconds and run for up to 15 minutes.
STeeRing Wheel / STalK / Panel uSing The ReMoTe STaRT funCTion Pre-Heating or Pre-cooling the Interior before exiting the vehicle, set the temperature controls to the desired setting and operation. after the system starts the vehicle, the heater or air-conditioning will activate and heat or cool the interior to your setting. Using the “Quick-Stop” Feature if you want to make a short stop and leave your vehicle running (to keep the interior warm or cool), the quick-stop feature allows you to do this while keeping your vehicle secure and your keys with you.
STeeRing Wheel / STalK / Panel uSing ValeT/SeRViCe MoDe Using Valet/Service Mode Service mode is used when servicing the vehicle to prevent the system from unexpectedly starting the engine while being serviced. While in service mode, the system’s keyless entry functions will operate normally, but the security system will not arm and the remote start function is temporarily disabled.
STeeRing Wheel / STalK / Panel SeCuRiTy SySTeM funCTionS When the Security System is Armed • All interior entry points (doors, hood & trunk/tailgate) are monitored for unauthorized entry. • When the security system is triggered, the horn sounds and the hazard or parking lights flash in a random pattern. The alarm cycle lasts for 30 seconds.
STeeRing Wheel / STalK / Panel eMeRgenCy oVeRRiDe PRoCeDuRe Emergency Override Procedure use this procedure if your remote control transmitter is lost or fails to function to disarm the security system and start your vehicle. use your key to enter the vehicle. The alarm will sound after the door is opened. insert your key into the ignition and turn it to the on position.
Need help?
Do you have a question about the Remote Starter and is the answer not in the manual?
Questions and answers