Sonic-FX FX Instruction Manual

Please read the entire instructions before using this product.
Please use product only in accordance with these instructions.
Magnet
Sanitizer
cover
Charging base
Install Brush Head: To install brush head, push brush
head all the way down over the tip of the toothbrush
body as shown. Give a slight twist to the left until the
brush head clicks securely into place. Bristles must be
aligned with the power buttons on the brush body. To
remove brush head, twist right to release and then
remove.
Charge Toothbrush (Please charge as soon as possible
after purchasing): Connect the power adapter with the
back of the charging base as shown and place the
unit on a flat surface and in a location where there is
no water spray. Plug into power outlet. When the
toothbrush is placed on the charging peg, the
charging indicator lights up while charging and turns
off when fully charged. The base of the toothbrush
must be in full contact with charging base in order for
charging to take place. Ensure that toothbrush is
charged for 18 hours before first use. Leave the charge
stand plugged into power outlet for normal daily use.
Warnings:
• Use only with power adapter supplied with this product or malfunction may occur.
• Base unit is not waterproof. Do NOT immerse in water under any circumstance.
UV sanitizer
Charging peg
Brush head pegs
Instruction
Manual
Body
UV lamp
Power
button
Mode
super
button
normal
massage
charge
Charging and
mode indicator
Back of
brush head
Back of
body
Charging
base
DC plug
Brush heads
Power adapter
DC plug
Charging
indicator
Charging
peg