Slendertone Flex Quick Start Manual

S h o rts for Bottom and Thigh Toning System
The Proven Solution to Firm, Tighten and Tone your Bottom and Thighs

Quick Start Guide

You must read the instruction manual before using the
Slendertone Flex Shorts for Bottom and Thigh Toning System
www.slendertone.com
A
Setup
1
Insert Batteries
The unit uses three 1.5V (LR03/AAA)
batteries. Insert the batteries as per
the diagram inside the battery com-
partment and replace the cover.
B
Pad Application
3
Attach Pads
Remove the covers from the patterned side of the
GelPads and place them, grid side down, onto the
shorts. Start with the back of the shorts, placing grid
side of the GelPads on the small and large positions
indicated, completely covering the metal studs.
When completed, turn the shorts over and place
GelPads on the front pad positions. The GelPads can
be adjusted to match different markings according
to your size (small, medium or large).
Distributed by: Compex Technologies Inc., 1811 Old Highway 8, New Brighton, MN 55112.
For customer service call:
1-800-551-2443
2
Front
Instruction Manual
Slendertone Flex
Control Unit
Pad Layout
In order to position the pads, you must first turn your
Slendertone Flex Bottom and Thigh (BT) shorts inside
out and place on a flat surface. Begin with the back of
the shorts facing upwards.
C
S M L
Contents
Back
BT Shorts Application
Putting on the BT
4
shorts
Without taking the liners off of the
GelPads, open the shorts at the waist and
legs and pull the BT shorts on completely.
S l e n d e rtone Flex
Bottom & Thigh To n i n g
( BT) Short s
Batteries
Adhesive Pads
P/N 910162 Rev. A