Service Code Table - HAKO Hakomatic B115R Operating Manual

Operation
2.4

Service code table

In the case of system errors, a four-digit
error code appears in the operating
panel in addition to the service indicator
(wrench symbol).
The dots in the service code flash.
Clear the fault or note down the service
Code
1.2.5.2.
1.2.6.1.
1.2.6.3. Brush attachment and brush
motor are switched off
1.4.6.1. Squeegee lift and suction
turbine are switched off
3.3.1.1. Service interval has expired
3.4.5.1. Cleaning function is
30
code and inform your authorized Hako
dealer.
When the cause is cleared, the error
must finally be acknowledged by turn-
ing the key switch OFF/ON.
Fault
Brushes stop Foreign bodies between brush
Brushes stop Foreign bodies block the brush
Foreign bodies between the
• Foreign bodies between the
squeegee and vehicle.
• Squeegee is jammed
Refer to maintenance schedule
• Parking brake is applied
switched off • Foreign bodies are interfering
with the drive chain or drive
wheels
Cause
and shaft
brush head and vehicle.
Solution
• Check the brushes for foreign bodies
and remove them, as necessary.
• Check the brushes for foreign bodies
and remove them, as necessary.
• Check the brush head for foreign bodies
and remove them, as necessary.
• Check the holding attachment for foreign
bodies and remove them, as necessary.
• Free the squeegee.
• Release the parking brake.
• Remove the foreign bodies