Seiwa S 60E Instruction Manual page 11

4. Operational procedures
4.5 Shut-down and maintenance procedures
l. Check that pressure is at zero then activate
safety lock on airless gun and remove nozzle
tip.
OSafety lock _,,-_._
2. Check that tel ef valve s open and press _re
control valve is at "low" then remove suction ..,,,_@ _{. _ ('_\
hose from paint and start engine.
",0
3" Sl°wlyturn pressurec°ntr°lvalvet°"high" .___\
and once
a certaiii
amount of paint has i_ln out
of returnhoseplace suctionhoseintocIeaning ,,
._? ' It: . :, _
# Cleai:ing fluid is defined as a solvent, water e_c r-_-_-_-_-_-_-_-_-_- ,A_DY-:x _:,, ,_ ]" _, _ (28:x
that is appropriate to the paint, g_ .,._.: _" q _ _
OiI-baset.I paint- solvent _ _' ../__._:, I_ Zg"-..
Water-based paint - water _ _ paint I cleaning',l i
"_ fluid Z'.J
Caution!
° Do "
I _
not increase presst re to such an
extent that paint or cleaning fluid spray
out,
8 OPM 101/98