Siemens Hicom 150 H Operating Instructions Manual page 33

6WHS#E\#6WHS
• Do not disturb, code:
• Speed-dialing, code:
• Associated service, code:
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
Set up a call to the system. Enter the station number
(contact System Support).
Wait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
Enter the code (necessary only if programmed in the
system).
Wait for a dial tone and then enter the code, e.g.
for "Do not Disturb On". Make other inputs as necessary
(refer to the operating instructions for pulse and DTMF
telephones).
or
Dial the external number.
You can only execute one function at a time, or
set up only one outgoing connection.
The connection is immediately released after
successful activation of a function.
In the case of an external-external call, the
connection is released as soon as either of the
parties ends the call.
8VLQJ#2WKHU#)XQFWLRQV
97/#97 Æ page 10
*
7 Æ page 20
*
83 Æ page 31
*
97
*
66