Exacq exacqVision User Manual
  1. Manuals
  2. Brands
  3. Exacq Manuals
  4. Recording Equipment
  5. exacqVision
  6. User manual

Exacq exacqVision User Manual

Network video recorder
Hide thumbs Also See for exacqVision:
Table of Contents

Advertisement

Quick Links

Information in this document is subject to change without notice.
Information in this document is subject to change without notice.
Information in this document is subject to change without notice.
© Copyright 2006-2011
Exacq Technologies is a trademark of Exacq Technologies, Inc. Other trademarks and trade
Exacq Technologies is a trademark
names may be used in this document to refer to either the entities claiming the marks and names
names may be used in this document to refer to either the entities claiming the marks and names
names may be used in this document to refer to either the entities claiming the marks and names
or their products. Exacq Technologies, Inc., disclaims any proprietary interest in trademarks and
or their products. Exacq Technologies, Inc., disclaims any proprietary interest in trademarks and
or their products. Exacq Technologies, Inc., disclaims any proprietary interest in trademarks and
Exacq Technologies makes no warranty of any kind with regard to this material, including, but not
Exacq Technologies makes no warranty of any kind with regard to this material, including, but not
Exacq Technologies makes no warranty of any kind with regard to this material, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose. Exacq
limited to, the implied warranties of merchantability and fitness for a particular purpose. Exacq
limited to, the implied warranties of merchantability and fitness for a particular purpose. Exacq
Technologies shall not be liable
Technologies shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.
damages in connection with the furnishing, performance, or use of this manual.
damages in connection with the furnishing, performance, or use of this manual.
Network Video Recorder
Network Video Recorder

User Manual

(updated January 21, 2011)
(updated
2011, Exacq Technologies, Inc. All rights reserved.
, Exacq Technologies, Inc. All rights reserved.
of Exacq Technologies, Inc. Other trademarks and trade
trade names other than its own.
for errors contained herein or for incidental or consequential
Exacq Technologies, Inc.
11955 Exit Five Parkway, Bldg 3
Fishers, IN 46037 USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the exacqVision and is the answer not in the manual?

Questions and answers

Sandra
April 21, 2025

power went out while I was viewing cameras, when power restored, it says "No VIdeo" when I resumed the camera page. Is this just a reset solution from the main camera system and not my laptop

0

Related Manuals for Exacq exacqVision

Summary of Contents for Exacq exacqVision

  • Page 1: User Manual

    Exacq Technologies, Inc., disclaims any proprietary interest in trademarks and trade names other than its own. Exacq Technologies makes no warranty of any kind with regard to this material, including, but not Exacq Technologies makes no warranty of any kind with regard to this material, including, but not Exacq Technologies makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

  • Page 2: Table Of Contents

    Network Connections for IP Camera Network Connections for IP Camera exacqVision System ........................ 14 Network Bandwidth Example for IP Camera exacqVision System Network Bandwidth Example for IP Camera exacqVision System ....................15 3 Chassis Layout ................................16 Back Panel Layout ........
  • Page 3 Serial Port Setup .......................................... 164 Notifications ..........................................166 exacqRecall Button Configuration Button Configuration.............................. 170 Event Linking ..........................................177 Schedule..........................................180 Users Setup..........................................187 exacqVision User Manual Page 3 1/24/2011...
  • Page 4 Recommended Remote Client PC Requirements .......................... 193 Installing the Remote Client Application Installing the Remote Client Application............................193 Starting the exacqVision Remote Client Application Starting the exacqVision Remote Client Application........................ 197 7 Special Features ..............................199 Multi Monitor Operation........

  • Page 5: Introduction

    Thank you for purchasing the exacqVision high-performance network digital video recorder. performance network digital video recorder. This manual was written to help you install your exacqVision hardware and software. Your new system manual was written to help you install your exacqVision hardware and software. Your new system manual was written to help you install your exacqVision hardware and software.

  • Page 6: What You Will Need To Begin

    Motion Detection Recording is the default video recording setting of the exacqVision NVR system ion Detection Recording is the default video recording setting of the exacqVision NVR system ion Detection Recording is the default video recording setting of the exacqVision NVR system because it’s the most efficient and frequently used method of recording video.
  • Page 7 There are additional action types that can be linked to the event types on the Event Linking screen. Connecting a door sensor to a trigger input on the exacqVision NVR and linking it to a Connecting a door sensor to a trigger input on the exacqVision NVR and linking it to a...

  • Page 8: Features

    Interface with cash registers (POS) and ATMs for video + transaction text recording Interface with cash registers (POS) and ATMs for video + transaction text recording  DVD Recorder  Open API for third-party integration and interoperability party integration and interoperability exacqVision User Manual Page 8 1/24/2011...

  • Page 9: Sample Configurations

    Sample Configurations Sample Configurations One of the most appealing features of the exacqVision product line is its ability to address a wide most appealing features of the exacqVision product line is its ability to address a wide most appealing features of the exacqVision product line is its ability to address a wide...

  • Page 10: Remote Exacqvision System

    Remote exacqVision System Remote exacqVision System Multi Branch Office exacqVision System ranch Office exacqVision System exacqVision User Manual Page 10 1/24/2011...

  • Page 11: Enterprise Exacqvision System Enterprise Exacqvision System

    Enterprise exacqVision System Enterprise exacqVision System exacqVision User Manual Page 11 1/24/2011...

  • Page 12: Network Connections For Analog Camera Exacqvision System Network Connections For Analog Camera Exacqvision System

    A detailed example of a small enterprise system is shown to illustrate network configurations to illustrate network configurations which will provide satisfactory performance for your exacqVision systems. which will provide satisfactory performance for your exacqVision systems. In the In the drawing below, it is assumed that the customer has a pre...

  • Page 13: Network Bandwidth Example For Analog Camera Exacqvision System Network Bandwidth Example For Analog Camera Exacqvision System

    Ethernet switches. While a 100 Mbps connection from the switch to each While a 100 Mbps connection from the switch to each exacqVision Client is sufficient, xacqVision Client is sufficient, it can be seen that each active exacqVision Client active exacqVision Client increases the aggregate network bandwidth out aggregate network bandwidth out of the exacqVision server.

  • Page 14: Network Connections For Ip Camera Network Connections For Ip Camera Exacqvision System

    An installation with IP cameras An installation with IP cameras is quite similar. Exacq recommends that the IP cameras are wired Exacq recommends that the IP cameras are wired in “home-run” style back to a run” style back to an Ethernet switch near the exacqVision Server.

  • Page 15: Network Bandwidth Example For Ip Camera Exacqvision System Network Bandwidth Example For Ip Camera Exacqvision System

    Again, referring to the diagram below, gigabit Ethernet connections are recommended between the connections are recommended between the exacqVision servers and the Ethernet switches, but 100 Mbps connections from the switches to exacqVision servers and the Ethernet switches, but 100 Mbps connections from the switches to exacqVision servers and the Ethernet switches, but 100 Mbps connections from the switches to each IP camera and exacqVision Client are sufficient.

  • Page 16: Chassis Layout

    16 Camera Outputs – Loop Through (1-8 row one, 9-16 row two) 16 row two) (19) 1 Switched Multi- -Picture Composite Video Output (20) AC Power Input – – Switching Power Supply – 115V/230V, 50/60 Hz 115V/230V, 50/60 Hz exacqVision User Manual Page 16 1/24/2011...

  • Page 17: Front Panel Layout - Doors Closed Doors Closed

    Power switch – turns power on/off the system turns power on/off the system DVD R/W disc drive DVD R/W disc drive – Used for exporting video to a DVD disc. Open/Close DVD button. Open/Close DVD button. exacqVision User Manual Page 17 1/24/2011...

  • Page 18: Hardware Installation

    Connect the Ethernet switch to the Connect the Ethernet switch to the 10/100/1000 Mbits/sec Gigabit Ethernet Adapter 10/100/1000 Mbits/sec Gigabit Ethernet Adapter Port Connect the IP camera to the Ethernet switch Connect the IP camera to the Ethernet switch exacqVision User Manual Page 18 1/24/2011...

  • Page 19: Network Setup

    Network Setup exacqVision systems can be connected to a local area network (LAN) or wide area network s can be connected to a local area network (LAN) or wide area network s can be connected to a local area network (LAN) or wide area network (WAN) for the purpose monitoring or searching for video from a remote location.

  • Page 20: Rs-422/Rs485 Port Setup

    PTZ camera. There are four small screws on the top of the connector that need to be partially unscrewed...

  • Page 21: Trigger Input

    The Trigger Inputs terminal block plug on the back of the exacqVision unit can be easily removed to connect the wires from the source on the back of the exacqVision unit can be easily removed to connect the wires from the source on the back of the exacqVision unit can be easily removed to connect the wires from the source sensor device (in this example a door sensor).

  • Page 22: Alarm Output - Relay

    24 VDC latching relay. Through the Event Linking screen on page Through the Event Linking screen on page 177 exacqVision can be configured to turn on the exacqVision can be configured to turn on the light upon predefined events (motion, input trigger, etc…).

  • Page 23: Alarm Output - Ttl

    Alarm Output - TTL exacqVision has 15 TTL Alarm Outputs that can exacqVision has 15 TTL Alarm Outputs that can be triggered by a variety external events. a variety external events. In this example, the exacqVision is integrated with a building automation system through a 0...

  • Page 24: Audio Input

    KIT #101 pre-amplify the microphone signal and produce a line level microphone signal and produce a line level output that is connected directly to the connected directly to the exacqVision audio inputs. Connect the ground ground output from the line level security microphone to the ground of the...

  • Page 25: Software Operation

    There is one exacqVision Client application that There is one exacqVision Client application that can be installed in two different installed in two different configurations depending on your requirements. depending on your requirements. The Client has the same features, functions and user interface...

  • Page 26: Starting The Exacqvision Nvr System Arting The Exacqvision Nvr System

    VGA monitor, keyboard, mouse and came , keyboard, mouse and cameras (analog and IP) or it can be connected to a network and IP) or it can be connected to a network to access other exacqVision NVR’s to access other exacqVision NVR’s. 2. exacqVision Remote...
  • Page 27 Since it is running as a service, t Since it is running as a service, the exacqVision Server will continue to record video even if no will continue to record video even if no user is logged in or running exacq exacqVision Client.
  • Page 28 By default both the user and admin operating system accounts have operating system accounts have settings which provide administrator access to the instance of settings which provide administrator access to the instance of exacqVision Server Server running on the local computer, which is always via the 127.0.0.1 IP address , which is always via the 127.0.0.1 IP address.
  • Page 29 (note changes in red) In the recommended configuration In the recommended configuration, a restart of the exacqVision system due to power outage will due to power outage will put the system in a safe state from which administrator privilege...

  • Page 30: Starting The Local Client

    Help button. Click it, to access online h access online help for your exacqVision System. You can also toggle to and from the online help system by using the F1 key. You can also toggle to and from the online help system by using the F1 key.

  • Page 31: Updating Exacqvision Client Software Updating Exacqvision Client Software

    Updating exacqVision Client Client Software Exacq Technologies strives to enhance products based on new technologies as well as Technologies strives to enhance products based on new technologies as well as Technologies strives to enhance products based on new technologies as well as customer feedback.
  • Page 32 If a more recent version of the exacqVision Client has been released, it will b If a more recent version of the exacqVision Client has been released, it will b If a more recent version of the exacqVision Client has been released, it will begin the download process.
  • Page 33 Click the Next button to proceed to the next screen. You need to select a location for the exacqVision client. You need to select a location for the exacqVision client. The default…xxx Click the next button to Click the next button to proceed to the next screen.
  • Page 34 Finally, click the Finish button to complete the installation. Finally, click the Finish button to complete the installation. Old versions closed and new one Old versions closed and new one opened automatically. exacqVision User Manual Page 34 1/24/2011...

  • Page 35: Operating Modes

    Operating Modes exacqVision NVR systems have three main modes of operation depicted by the three icons below: n NVR systems have three main modes of operation depicted by the three icons below: n NVR systems have three main modes of operation depicted by the three icons below: Live Mode allows users the ability users the ability to view live video.

  • Page 36: Live Mode Overview

    Operating Modes – displays the three available views, Live, Search, and Setup. displays the three available views, Live, Search, and Setup. Title bar – displays exacqVision Local and Remote Client application title. displays exacqVision Local and Remote Client application title.
  • Page 37 PTZ Control window which allows you to maneuver a PTZ camera. (14) Soft Trigger Icon Soft Trigger Icon – Displays the status of any soft triggers on connected exacqVision Displays the status of any soft triggers on connected exacqVision servers. exacqVision User Manual...

  • Page 38: Layout Panel

    NOTE: The 4x3, 5x4, 6x x5, and 8x6 buttons are only available on widescreen monitors. buttons are only available on widescreen monitors. exacqVision User Manual Page 38 1/24/2011...
  • Page 39 The system will automatically fill the Video View Panel with the cameras from your the cameras from your Live Site Tree in the order they are listed. Tree in the order they are listed. exacqVision User Manual Page 39 1/24/2011...
  • Page 40 You can delete a camera from the a camera from the Video View Panel by right-clicking anywhere in the square and ing anywhere in the square and selecting Disconnect Streaming Video. selecting Disconnect Streaming Video. exacqVision User Manual Page 40 1/24/2011...
  • Page 41 Properties, and then clicking the OK button. From here you can reconfigure the camera to fit your needs. From here you can reconfigure the camera to fit your needs. See Camera Setup Camera Setup, page 135 for specific instructions. exacqVision User Manual Page 41 1/24/2011...

  • Page 42: Exacqreplay

    If you wish to stop the download, If you wish to stop the download, click the Stop Download button at the bottom of the window. click the Stop Download button at the bottom of the window. exacqVision User Manual Page 42 1/24/2011...
  • Page 43 Search Mode Overview Overview, pages 65-84, for complete instructions on how to search video. , for complete instructions on how to search video. exacqVision User Manual Page 43 1/24/2011...

  • Page 44: Live Event Monitoring

    You can stop the Event Monitoring You can stop the Event Monitoring display by right-clicking in the active video panel and ing in the active video panel and disabling the active event disabling the active event monitoring profile. exacqVision User Manual Page 44 1/24/2011...
  • Page 45 NOTE: For details on how to configure a For details on how to configure an Event Monitor profile, see Event Monitoring Event Monitoring, page 108, in the Setup section of the manual , in the Setup section of the manual. exacqVision User Manual Page 45 1/24/2011...

  • Page 46: Event Buttons

    Your exacqVision system allows you to monitor live video from a remote location Your exacqVision system allows you to monitor live video from a remote location Your exacqVision system allows you to monitor live video from a remote location using a separate client application.
  • Page 47 Simply click the icon to access the Soft Trigger window access the Soft Trigger window. exacqVision User Manual Page 47 1/24/2011...
  • Page 48 Event Button feature sing the Event Button feature on the Client Setup screen in Setup Mode. in Setup Mode. See Client Setup, page 94, for detailed instructions. , for detailed instructions. exacqVision User Manual Page 48 1/24/2011...

  • Page 49: Site Tree Navigation

    Since you may not want to view your cameras in the order they appear in the Live Site Tree, your exacqVision System exacqVision System allows you to organize your cameras into Groups. your cameras into Groups. (For instructions on creating camera groups, go to...
  • Page 50 Video View Panel. Once you have everything laid out the way you want Once you have everything laid out the way you want it, click the Save View button at the top of the View button at the top of the Live Site Tree. exacqVision User Manual Page 50 1/24/2011...
  • Page 51 Description field. Once you have typed a unique name and a description if desired, you have typed a unique name and a description if desired, click the Apply button click the Apply button. exacqVision User Manual Page 51 1/24/2011...
  • Page 52 You can also modify your views by clicking the Modify button at the top of the View Site You can also modify your views by clicking the Modify button at the top of the View Site Tree. exacqVision User Manual Page 52...
  • Page 53 The folder will appear in the My Views Site Tree in the lower-left quadrant of the screen. left quadrant of the screen. You can then drag and drop any views you wish to place in the folder. then drag and drop any views you wish to place in the folder. exacqVision User Manual Page 53 1/24/2011...
  • Page 54 View Tour. Begin by clicking the New Tour button in the cent Begin by clicking the New Tour button in the center of the Modify Views er of the Modify Views window. exacqVision User Manual Page 54 1/24/2011...
  • Page 55 Once you have named the tour, added the views and a description, and selected the appropriate and selected the appropriate dwell time, simply click the Apply button to save the settings. simply click the Apply button to save the settings. exacqVision User Manual Page 55 1/24/2011...
  • Page 56 You can now select the tour from the Live Views Site Tree and the views you have created will Views Site Tree and the views you have created will cycle through the Video View Panel. cycle through the Video View Panel. exacqVision User Manual Page 56 1/24/2011...

  • Page 57: Live Maps

    Live Maps allows you to select from a list of maps that you have imported into exacqVision. When to select from a list of maps that you have imported into exacqVision. When to select from a list of maps that you have imported into exacqVision.
  • Page 58 Maps can be created on a client computer, but they are associated directly with all exacqVision servers that have cameras and devices associated with the map. Thus, any map that vers that have cameras and devices associated with the map. Thus, any map that vers that have cameras and devices associated with the map.

  • Page 59: About Exacqvision

    About exacqVision Moving to the upper-right corner of the title ba right corner of the title bar, you’ll see an About exacqVision Box. r, you’ll see an About exacqVision Box. Clicking on this box provides information about the client software you are using.

  • Page 60: Online Help System

    Online Help System You can also access online help for your You can also access online help for your exacqVision System by clicking the Help butto by clicking the Help button or the F1 key. The system will default to information regarding the...

  • Page 61: Display Buttons

    Next to the Help button, you’ll find the Hide/Show Navigation Panel button. Click the button to enlarge the exacqVision display by hiding the Live Camera Site Tree. enlarge the exacqVision display by hiding the Live Camera Site Tree. Click it again to return to the Click it again to return to the normal view.

  • Page 62: Ptz Control

    Video Panel and select Digital PTZ. A checkmark will be displayed A checkmark will be displayed in the menu when the digital PTZ feat in the menu when the digital PTZ feature has been enabled. exacqVision User Manual Page 62 1/24/2011...
  • Page 63 To control the speed of the pan/tilt and zoom functions, adjust the buttons. To control the speed of the pan/tilt and zoom functions, adjust the Speed Speed slider bar directly below each feature. exacqVision User Manual Page 63 1/24/2011...
  • Page 64 Joystick Setup, page 103, for detailed instructions on how to set up your joystick. for detailed instructions on how to set up your joystick. for detailed instructions on how to set up your joystick. exacqVision User Manual Page 64 1/24/2011...

  • Page 65: Search Mode Overview

    Camera name is Camera name is displayed in bold when it has been clicked on in bold when it has been clicked on video time line bar. exacqVision User Manual Page 65 1/24/2011...
  • Page 66 For more inf areas of a video window. For more information, see the Smart Search section of this chapter. section of this chapter. exacqVision User Manual Page 66 1/24/2011...
  • Page 67 POS, or event). To search every camera on an exacqVision server, simply check the bo exacqVision server, simply check the box to the left of the server to the left of the server in the Camera Selection Tree. You can You can then deselect any cameras you don’t want to search.
  • Page 68 Server Time options are visible if you are connected to a server in another time Time options are visible if you are connected to a server in another time Time options are visible if you are connected to a server in another time zone. exacqVision User Manual Page 68 1/24/2011...
  • Page 69 The evenly spaced green bars represent video that was recorded based on The evenly spaced green bars represent video that was recorded based on the the time lapse setting. (See Storage Setup, page 154 154) exacqVision User Manual Page 69 1/24/2011...

  • Page 70: Video Timeline

    Click the (+) button to display longer increments. Click the (+) button to display longer increments. The yellow Video Cursor is used to select is used to select a segment of recorded video. exacqVision User Manual Page 70 1/24/2011...

  • Page 71: Video Playback

    A red border around the playback window indicates an alarm triggered the recording. A red border around the playback window indicates an alarm triggered the recording. A red border around the playback window indicates an alarm triggered the recording. exacqVision User Manual Page 71 1/24/2011...
  • Page 72 To zoom in on a single camera, double click camera, double click its Video Playback window. To return to the multi camera view, d return to the multi camera view, double click the remaining Video Playback window. Video Playback window. exacqVision User Manual Page 72 1/24/2011...
  • Page 73 When you want to remove ou want to remove the motion boxes, right-click in the Video Playback window again and select in the Video Playback window again and select View View Motion to remove the checkmark. exacqVision User Manual Page 73 1/24/2011...
  • Page 74 You can quickly scan the video by dragging the Scrub Handle You can quickly scan the video by dragging the Scrub Handle along the Scrub Bar along the Scrub Bar to the left or right. exacqVision User Manual Page 74 1/24/2011...
  • Page 75 Play and Reverse buttons, which play video at actual speed even if frames must be skipped to do so. actual speed even if frames must be skipped to do so. exacqVision User Manual Page 75 1/24/2011...
  • Page 76 POS overlay data, as shown in the following figure. Notice the data displayed on the right for the transaction that was just completed in the video window. for the transaction that was just completed in the video window. exacqVision User Manual Page 76 1/24/2011...

  • Page 77: Smart Search

    To select multiple adjacent boxes, click and drag the cursor. To select multiple adjacent boxes, click and drag the cursor. To select multiple adjacent boxes, click and drag the cursor. exacqVision User Manual Page 77 1/24/2011...
  • Page 78 Search frames in that time range are Smart Search frames in that time range are skipped. exacqVision User Manual Page 78 1/24/2011...

  • Page 79: Navigation Pane

    Setup, page , page 111, for Groups setup instructions.) The actual Groups search The actual Groups search process is the same as conducting a Cameras search. process is the same as conducting a Cameras search. exacqVision User Manual Page 79 1/24/2011...

  • Page 80: Searching Maps

    Select the date and time you would like to search by using the Calendar and Start Time fields, and then click the Search button. Video from all the selected cameras and maps will be displayed in the will be displayed in the Video Playback window. exacqVision User Manual Page 80 1/24/2011...

  • Page 81: Searching Views

    To return to the multi camera view, double click in the Video Playback window again. window. To return to the multi camera view, double click in the Video Playback window again. window. To return to the multi camera view, double click in the Video Playback window again. exacqVision User Manual Page 81 1/24/2011...

  • Page 82: Searching Events

    Events search to locate video or audio associated with the event. To do this, click the Events To do this, click the Events button on the Navigation pane and the Event you w button on the Navigation pane and the Event you want to search. exacqVision User Manual Page 82 1/24/2011...
  • Page 83 Navigation Pane, and then conduct a search on the camera associated with that event. Navigation Pane, and then conduct a search on the camera associated with that event. Navigation Pane, and then conduct a search on the camera associated with that event. exacqVision User Manual Page 83 1/24/2011...

  • Page 84: Exporting Files

    Clipboard. The image will be stored, and you can paste it into your document. The image will be stored, and you can paste it into your document. The image will be stored, and you can paste it into your document. exacqVision User Manual Page 84 1/24/2011...
  • Page 85 Video Playback window, and select Mark Export Stop ndow, and select Mark Export Stop. Once you have marked the beginning and end Once you have marked the beginning and ending points, click the Save Video Button. Save Video Button. exacqVision User Manual Page 85 1/24/2011...
  • Page 86 CD or DVD. The default directory is exacqVision Files in My Documents. The default directory is exacqVision Files in My Documents. The file name will default to the The file name will default to the camera name.
  • Page 87 You can download codecs at the following URLs:  3ivx MPEG4 decoder http://store.3ivx.com/3ivxStore/?features=dec&pl http://store.3ivx.com/3ivxStore/?features=dec&platform=win&license=plus&Go=Go  DivX decoder http://www.divx.com/en/downloads http://www.divx.com/en/downloads  Quicktime codec resources Quicktime codec resources http://www.apple.com/quicktime/resources/components.html?os=Windows&ctype=696d6463&csubtype=48323634 http://www.apple.com/quicktime/resources/components.html?os=Windows&ctype=696d6463&csubtype=48323634 http://www.apple.com/quicktime/resources/components.html?os=Windows&ctype=696d6463&csubtype=48323634  Perian Codec for Quicktime Perian Codec for Quicktime http://www.perian.org exacqVision User Manual Page 87 1/24/2011...
  • Page 88 Once you click the Save to a CD or DVD button, the Burn Disc window will be displayed. You can change the name of the disc by clicking the You can change the name of the disc by clicking the “Edit Disc Name” button. button. exacqVision User Manual Page 88 1/24/2011...
  • Page 89 Refresh Disc button before Burning the the Refresh Disc button before Burning the new CD. Once you have made all of the Once you have made all of the appropriate changes, press the “Burn Disc” button ” button. exacqVision User Manual Page 89 1/24/2011...
  • Page 90 Click the Burn button to initiate the writing process. Click the Burn button to initiate the writing process. This may take several minutes may take several minutes, depending upon the amount of video to be written. unt of video to be written. exacqVision User Manual Page 90 1/24/2011...

  • Page 91: Setup Mode Overview

    Setup Screen – this area this area displays various configuration screens when you click on the when you click on the icons in the configuration tree. icons in the configuration tree. exacqVision User Manual Page 91 1/24/2011...

  • Page 92: Add System

    To add an exacqVision NVR to your dd an exacqVision NVR to your System List click the New button and enter the Username, and enter the Username, Password, and Password Confirm Password Confirm.
  • Page 93 To disconnect or reconnect a system, simply deselect or select the Connection box in the System List. Disconnected systems do not appear in the Configuration tree. Disconnected systems do not appear in the Configuration tree. Only those systems selected Only those systems selected will be displayed. exacqVision User Manual Page 93 1/24/2011...

  • Page 94: My Systems

     To view additional version information for a system, right To view additional version information for a system, right-click the information in the click the information in the Version column for that system. Version column for that system. exacqVision User Manual Page 94 1/24/2011...
  • Page 95 Client, the Connection Status will be are connected to the server in exacqVision Client, the Connection Status will be displayed as Network Activity Timeout. The status will then be displayed as Disconnected after a specific Network Activity Timeout.

  • Page 96: Client Setup

    VGA Acceleration Mode (Video Graphics Adapter) field can be used to to resolve display issues that may be caused by your video card. Se issues that may be caused by your video card. See Display Issues, page 225. exacqVision User Manual Page 96 1/24/2011...
  • Page 97 Live and Search icons. This may prevent confusion that may occur from displaying an icon the This may prevent confusion that may occur from displaying an icon the This may prevent confusion that may occur from displaying an icon the restricted user can’t utilize. exacqVision User Manual Page 97 1/24/2011...
  • Page 98 To change the color, simply click on the colored bar beside the border you would like to change. Select a basic color or create a custom color, and then click OK. Select a basic color or create a custom color, and then click OK. exacqVision User Manual Page 98 1/24/2011...
  • Page 99 The new color will be reflected on the color bar in the Colors window. To return to the Default colors, simply click the Default button. To return to the Default colors, simply click the Default button. exacqVision User Manual Page 99 1/24/2011...
  • Page 100 The Tool Tip will default to Event button, but you can change it The Tool Tip will default to Event button, but you can change it to something to something more descriptive by typing in the Tool Tip field. exacqVision User Manual Page 100 1/24/2011...
  • Page 101 You can also customize your icon You can also customize your icon using the Look in field. Once you find an appropriate icon, click Once you find an appropriate icon, click the Open button. exacqVision User Manual Page 101 1/24/2011...
  • Page 102 Soft Trigger icon on the Live mode toolbar toolbar. You will need a separate icon for each Soft Trigger shortcut. a separate icon for each Soft Trigger shortcut. exacqVision User Manual Page 102 1/24/2011...

  • Page 103: Joystick Setup

    If the position control is drifting while the joystick is in its resting position, you can If the position control is drifting while the joystick is in its resting position, you can calibrate your joystick by clicking the Calibrate button. joystick by clicking the Calibrate button. exacqVision User Manual Page 103 1/24/2011...
  • Page 104 If your joystick has a rudder, you can switch the zoom functionality to the rudde functionality to the rudder by selecting the Rudder radio button in the Zoom Control Source box. selecting the Rudder radio button in the Zoom Control Source box. exacqVision User Manual Page 104 1/24/2011...
  • Page 105 The corresponding number on the screen will turn from red to green. Once you have finished programming the settings for you Once you have finished programming the settings for your joystick, click the Apply button. joystick, click the Apply button. exacqVision User Manual Page 105 1/24/2011...

  • Page 106: Enterprise User Setup

    The status mn displays the status of the selected account on each system. The status can be OK, Pending, Not Enterprise, Disconnected, or Deleted. can be OK, Pending, Not Enterprise, Disconnected, or Deleted. exacqVision User Manual Page 106 1/24/2011...
  • Page 107 When you add a user from an Active Directory or OpenLDAP directory, the password used for that account in exacqV account in exacqVision is the same as the password assigned to that account in the ision is the same as the password assigned to that account in the directory.

  • Page 108: Event Monitoring

    Event Monitoring The Event Monitoring screen allows you en allows you to set up your exacqVision client to react to events that client to react to events that take place in the server or servers or servers to which it is connected.
  • Page 109 Once you have initiated your profile, you need to add an event or events that you wish to monitor. If you are familiar with exacqVision’s Event Linking feature If you are familiar with exacqVision’s Event Linking feature (Event Linking Event Linking, page 177), this will look familiar to you.
  • Page 110 Click the “Apply” button on the upper right when you have finished your profile. You can now view your event profile in Live m iew your event profile in Live mode. (Live Event Monitor, page page 44.) exacqVision User Manual Page 110 1/24/2011...

  • Page 111: Group Setup

    NVR systems with 16 cameras each exacqVision NVR systems with 16 cameras each, and you have a four story building that you want and you have a four story building that you want to place eight cameras on each to place eight cameras on each floor.
  • Page 112 Description box to describe the new group you’re creating. ab to the Description box to describe the new group you’re creating. Select an icon to represent your group. Select an icon to represent your group. exacqVision User Manual Page 112 1/24/2011...
  • Page 113 If you want to remove a camera from the Group, select the Camera from the Cameras in Group If you want to remove a camera from the Group, select the Camera from the Cameras in Group box, and click the Remove button. Remove button. exacqVision User Manual Page 113 1/24/2011...
  • Page 114 These groups can now be used to monitor live video These groups can now be used to monitor live video (page 57), or searching video , or searching video (page exacqVision User Manual Page 114 1/24/2011...

  • Page 115: Map Setup

    You can drag this parent map icon anywhere on the map. To complete a map, click Apply. To delete the map, click To complete a map, click Apply. To delete the map, click Delete. exacqVision User Manual Page 115 1/24/2011...

  • Page 116: System Information

    The Log Settings control box gives you the ability to set the maximum days that Logged Alarms and the System Logs are kept on the system. and the System Logs are kept on the system. exacqVision User Manual Page 116 1/24/2011...

  • Page 117: System Setup

    NOTE: Without a license key, your exacqVision Server can connect to Without a license key, your exacqVision Server can connect to Without a license key, your exacqVision Server can connect to only one IP device at a time. To obtain your license key online, go to To obtain your license key online, go to www.exacq.com or...
  • Page 118 Override to force the IP camera to synchronize to the time server entered; otherwise, the Override to force the IP camera to synchronize to the time server entered; otherwise, the camera will synchronize with the exacqVision server. camera will synchronize with the exacqVision server.
  • Page 119 The Active Directory/LDAP tab allows you to manage a large database of user accounts. This is an advanced feature of exacqVision software; f s is an advanced feature of exacqVision software; for more information about the or more information about the tab, see the “Active Directory/...

  • Page 120: Add Ip Cameras

    Device Type and IP Address. Since you are adding a new IP Camera to the exacqVision Server, you will more than likely find a IP Camera to the exacqVision Server, you will more than likely find a IP Camera to the exacqVision Server, you will more than likely find a default IP address listed for the camera default IP address listed for the camera in the IP Camera Finder.
  • Page 121 Addendum to the exacqVision IP exacqVision IP QuickStart guide for more information. NOTE: NOTE: You may also need to contact your IT department to determine need to contact your IT department to determine the appropriate range of IP addresses to use.

  • Page 122: Ip Camera Recording Setup Ip Camera Recording Setup

    The exacqVision NVR systems by default are setup to record in CIF resolution if a video signal is The exacqVision NVR systems by default are setup to record in CIF resolution if a video signal is The exacqVision NVR systems by default are setup to record in CIF resolution if a video signal is detected.
  • Page 123 Once you have made the change you must click the Apply button to make the change. Once you have made the change you must click the Apply button to make the change. To cancel the changes, click the To cancel the changes, click the cancel button. exacqVision User Manual Page 123 1/24/2011...

  • Page 124: Ip Camera Setup

    IP camera settings such as camera name, on-screen display, PTZ settings, screen display, PTZ settings, video settings, recording quality and motion and video settings, recording quality and motion and video masks. exacqVision User Manual Page 124 1/24/2011...

  • Page 125: Important Note

    IMPORTANT NOTE Any camera settings that are not available in the exacqVision software can be accessed through the Any camera settings that are not available in the exacqVision software can be accessed through the Any camera settings that are not available in the exacqVision software can be accessed through the camera’s web page.
  • Page 126 See Camera Setup, page 135, for instructions on adjusting all settings for instructions on adjusting all settings in the exacqVision software in the exacqVision software with the exception of Motion Mask Motion Mask, Motion Window, and Crop Window.
  • Page 127 User Manual Page 127 1/24/2011...
  • Page 128 Format to mpeg and the Quality to 8. It will also clear any Motion M It will also clear any Motion Masks that had been created. asks that had been created. exacqVision User Manual Page 128 1/24/2011...
  • Page 129 Click and drag your cursor over the portion of the camera image you would like to be Click and drag your cursor over the portion of the camera image you would like to be displayed. Anything outsi Anything outside of the rectangle will be cropped. exacqVision User Manual Page 129 1/24/2011...
  • Page 130 You will need to click the Edit button to start the cropping process again. process again. Once you are satisfied with the crop settings, click the Apply button. Once you are satisfied with the crop settings, click the Apply button. exacqVision User Manual Page 130 1/24/2011...
  • Page 131 If you wish to restore the camera image to full restore the camera image to full-size, simply click the Edit size, simply click the Edit ►Clear ►Apply to clear the crop setting. to clear the crop setting. exacqVision User Manual Page 131 1/24/2011...

  • Page 132: Edvr 4000 Device

    4000 Device The eDVR 4000 Device is the compression board installed in the exacqVision video server that the compression board installed in the exacqVision video server that the compression board installed in the exacqVision video server that manages the analog video cameras connected to the system.

  • Page 133: Camera Recording Setup

    The exacqVision NVR systems by default are setup to record in The exacqVision NVR systems by default are setup to record in 2CIF resolution if a video signal is CIF resolution if a video signal is detected.
  • Page 134 Once you have made the change you must Once you have made the change you must click the Apply button to make the change. click the Apply button to make the change. exacqVision User Manual Page 134 1/24/2011...

  • Page 135: Camera Setup

    Name field and enter a new camera name then click Apply to make the change. You will You will see the new camera name in the Camera tree amera tree and Camera Information box (12). exacqVision User Manual Page 135 1/24/2011...
  • Page 136 User Manual Page 136 1/24/2011...
  • Page 137 User Manual Page 137 1/24/2011...
  • Page 138 The outside border of the video display will The outside border of the video display will turn blue indicating motion recording. turn blue indicating motion recording. exacqVision User Manual Page 138 1/24/2011...
  • Page 139 To create a motion mask, To create a motion mask, complete the following steps: complete the following steps: If you haven’t already done so, c If you haven’t already done so, click on the Edit button: exacqVision User Manual Page 139 1/24/2011...
  • Page 140 You can then create a new mask. You can then create a new mask. Once you are happy with the location of the mask, click Once you are happy with the location of the mask, click the Apply button. exacqVision User Manual Page 140 1/24/2011...
  • Page 141 Click on the Edit button and a yellow video mask grid will appear over the live video. Click on the Edit button and a yellow video mask grid will appear over the live video. exacqVision User Manual Page 141 1/24/2011...
  • Page 142 This area is now masked from is now masked from both live and recorded video. both live and recorded video. To clear the mask, click the Clear button. click the Clear button. exacqVision User Manual Page 142 1/24/2011...
  • Page 143 Address dropdown menu. The protocol is automatically set based on the The protocol is automatically set based on the serial port selection. exacqVision User Manual Page 143 1/24/2011...
  • Page 144 Preset field and then clicking the field and then clicking the Delete button. button. You can then set the camera to the desired location, camera to the desired location, retype the name, ame, and then click the Set button. exacqVision User Manual Page 144 1/24/2011...
  • Page 145 The Resume Time field sets the delay if you take over the Tour delay if you take over the Tour manually. (10) Check the Enable box to activate Check the Enable box to activate the Tour. exacqVision User Manual Page 145 1/24/2011...
  • Page 146 User Manual Page 146 1/24/2011...

  • Page 147: Audio Input Setup

    NDVR (see Audio Input Audio Input, page 24). The exacqVision System ships with the audio ships with the audio input positions disabled due to legal restraints on audio recording in some disabled due to legal restraints on audio recording in some jurisdictions.
  • Page 148 To stop the live audio feed, deselect th To stop the live audio feed, deselect the Listen box. exacqVision User Manual Page 148 1/24/2011...

  • Page 149: Trigger Input Setup

    Normally Open and NC = Normally Closed) of the exacqVision input triggers. There are 16 Trigger Position that correspond to the 16 Trigger Inputs on the back the exacqVision NDVR (see Trigger Position that correspond to the 16 Trigger Inputs on the back the exacqVision NDVR (see...

  • Page 150: Alarm Output Setup

    There is one (1) Relay Output and 15 TTL Alarm Outputs that There is one (1) Relay Output and 15 TTL Alarm Outputs that correspond to the output triggers on the back the exacqVision NDVR (see correspond to the output triggers on the back the exacqVision NDVR (see...
  • Page 151 Output Trigger. Now, whenever video motion is detected you will see the Now, whenever video motion is detected you will see the Output Trigger is toggled from is toggled from NORMAL to ALARM. exacqVision User Manual Page 151 1/24/2011...

  • Page 152: Video Output Setup

    (switching) between video cameras in either full (switching) between video cameras in either full, quad (2 x 2), 3 x 3, or 4 x 4 , 3 x 3, or 4 x 4 screen display modes. exacqVision User Manual Page 152 1/24/2011...
  • Page 153 Once you have made changes click on Apply and the video output tour will begin. Once you have made changes click on Apply and the video output tour will begin. Once you have made changes click on Apply and the video output tour will begin. exacqVision User Manual Page 153 1/24/2011...

  • Page 154: Storage Setup

    We advise you to install the exacqVision We advise you to install the exacqVision software on your C: drive and use separate hard drives for video storage...
  • Page 155 (See Camera Recording Setup Camera Recording Setup, page 133, and Camera Setup, page , page 135.) exacqVision User Manual Page 155 1/24/2011...
  • Page 156 Repeat for each camera that requires expiration rules. To remove expiration rules, select To remove expiration rules, select one or more camera names in the list on the right and click <<Remove. in the list on the right and click <<Remove. exacqVision User Manual Page 156 1/24/2011...

  • Page 157: Time-Lapse Setup

    Time-lapse Setup You can set your exacqVision system to You can set your exacqVision system to take a periodic snapshot even if the cameras are set to even if the cameras are set to record upon motion or alarm. record upon motion or alarm. This is useful if it is necessary to prove the system was operational useful if it is necessary to prove the system was operational even in the absence of motion.

  • Page 158: Serial Profile Setup

    To view an existing profile, simply click on it in the Existing Profiles field. You can delete an You can delete an existing profile by clicking the Delete button. existing profile by clicking the Delete button. exacqVision User Manual Page 158 1/24/2011...
  • Page 159 Start of Transaction, marker tells the exacqVision System when the transaction has started. The EOT, or End of Transaction, marker tells the EOT, or End of Transaction, marker tells the exacqVision System when the transaction has ended. transaction has ended.
  • Page 160 You can require case sensitivity for all strings or all key words by selecting the You can require case sensitivity for all strings or all key words by selecting the appropriate Case Sensitive option under each list. appropriate Case Sensitive option under each list. exacqVision User Manual Page 160 1/24/2011...
  • Page 161 To link your profile to an event, begin by clicking the New Event button. To link your profile to an event, begin by clicking the New Event button. exacqVision User Manual Page 161 1/24/2011...
  • Page 162 The system will default to 0 for every Action Type except Record Audio. efault to 0 for every Action Type except Record Audio. Record Audio defaults to five seconds Record Audio defaults to five seconds exacqVision User Manual Page 162 1/24/2011...
  • Page 163 Event Linking screen, you will select Serial Serial Port rather than Serial Profile. The profile will be assigned on the The profile will be assigned on the Serial Port Setup screen. exacqVision User Manual Page 163 1/24/2011...

  • Page 164: Serial Port Setup

    Serial Port Setup The Serial Port Setup screen is where you configure serial ports on your exacqVision NDVR so en is where you configure serial ports on your exacqVision NDVR so en is where you configure serial ports on your exacqVision NDVR so...
  • Page 165 IP address of the serial IP device, the port on which the system should communicate with IP address of the serial IP device, the port on which the system should communicate with the device, and the Max Line Length. device, and the Max Line Length. exacqVision User Manual Page 165 1/24/2011...

  • Page 166: Notifications

    Event Linking, page 177) to configure to configure the events that will cause an email message to be sent. cause an email message to be sent. exacqVision User Manual Page 166 1/24/2011...
  • Page 167 SMTP mail server that you will use to send email from the exacqVision System. you will use to send email from the exacqVision System. Obtain this information from your Obtain this information from your network administrator.
  • Page 168 Limiting notifications about the motion events to a maximum of one every 15 or 30 minutes (900 or 1800 seconds) co or 30 minutes (900 or 1800 seconds) could drastically reduce unnecessary emails. uld drastically reduce unnecessary emails. exacqVision User Manual Page 168 1/24/2011...
  • Page 169 NOTE: Once you have setup the Message Profile, y Once you have setup the Message Profile, you must go to the Event Linking Event Linking screen, page 177, to link it to an event. exacqVision User Manual Page 169 1/24/2011...

  • Page 170: Exacqrecall Button Configuration Button Configuration

    To configure the exacqRecall button: To configure the exacqRecall button: exacqVision User Manual Page 170 1/24/2011...
  • Page 171 In the Setup menu on the left of your screen, click on the name of the exacqVision server on In the Setup menu on the left of your screen, click on the name of the exacqVision server on which you will be setting up the exacqRecall button.
  • Page 172 You can check or anything. You can check or uncheck the box based on your system and click the Save button. based on your system and click the Save button. exacqVision User Manual Page 172 1/24/2011...
  • Page 173 If you add a disk to the system, click the Refresh Status button, and in a moment, you should see a message confirming that a blank CD is in the drive and is ready. message confirming that a blank CD is in the drive and is ready. exacqVision User Manual Page 173 1/24/2011...
  • Page 174 In some cases, events are still taking place after the button a supervisor or police officer to arrive. In some cases, events are still taking place after the button is pushed. exacqVision User Manual Page 174 1/24/2011...
  • Page 175 Next, name the profile (e.g. “Main Street Branch”). Finally, choose the cameras you wish to export and then click on the Finally, choose the cameras you wish to export and then click on the Apply button. Apply button. exacqVision User Manual Page 175 1/24/2011...
  • Page 176 Apply button at the bottom of the Event Linking page to apply the changes to the lick the Apply button at the bottom of the Event Linking page to apply the changes to the exacqVision System. Your exacqRecall button is now Your exacqRecall button is now configured and activated. exacqVision User Manual Page 176 1/24/2011...

  • Page 177: Event Linking

    Now you can go to the event searching screen and Now you can go to the event searching screen and select the event and only find video associated with the event. select the event and only find video associated with the event. exacqVision User Manual Page 177 1/24/2011...
  • Page 178 4000 Device, page 132) or Storage or Storage. IP Camera Connection Any one of the IP cameras connected to the exacqVision server. exacqVision server. Soft Trigger Select New to create a new soft trigger with a default name. new soft trigger with a default name. Double click to name it, or click Delete to remove it.
  • Page 179 Any one of the audio inputs connected to the exacqVision server. Any one of the audio inputs connected to the exacqVision server. Output Trigger Any output triggers on the back of the exacqVision server or IP cameras. on the back of the exacqVision server or IP cameras. Output Video 1 Any of the analog cameras connected to the exacqVision server.

  • Page 180: Schedule

    The Schedule screen is where you setup your camera and event recording schedule. screen is where you setup your camera and event recording schedule. screen is where you setup your camera and event recording schedule. exacqVision software ships with Motion (Blue) recording as the default schedule because this is the most...
  • Page 181 Event Linking screen (page 177 177). The Audio tab is used to schedule when audio is recorded. tab is used to schedule when audio is recorded. exacqVision User Manual Page 181 1/24/2011...
  • Page 182 Cameras and Audios which have been disabled will be reflected on the Day Cameras and Audios which have been disabled will be reflected on the Days Scheduling tab as a lighter shade of blue or green. tab as a lighter shade of blue or green. exacqVision User Manual Page 182 1/24/2011...
  • Page 183 Use your up or down arrow key to scroll through key to scroll through each camera or day of the week. each camera or day of the week. exacqVision User Manual Page 183 1/24/2011...
  • Page 184 You do not need to customize your schedule in You do not need to customize your schedule in both views. Select the view that Select the view that best meets your needs. exacqVision User Manual Page 184 1/24/2011...
  • Page 185 Apply to All Events button. the same schedule for every event you have enabled, you can click the Apply to All Events button. exacqVision User Manual Page 185...
  • Page 186 You can apply the schedule to all of the audio inputs by clicking Apply to All Audio In button. To cancel the schedule you created, click the Cancel button. To cancel the schedule you created, click the Cancel button. exacqVision User Manual Page 186 1/24/2011...

  • Page 187: Users Setup

    Active Directory or OpenLDAP directory, the password used for that account in exacqVision is the same as the password assigned to that account in the directory. exacqVision is the same as the password assigned to that account in the directory.
  • Page 188 Privileges sections. To modify a permission or privilege, select the appropriate check e appropriate check boxes. To expand or contract the tree, click the plus or minus buttons. expand or contract the tree, click the plus or minus buttons. exacqVision User Manual Page 188 1/24/2011...
  • Page 189 If you select the Allow Live Viewing or Allow Searching check box, all the privileges subordinate If you select the Allow Live Viewing or Allow Searching check box, all the privileges subordinate to that privilege are selected or deselected. to that privilege are selected or deselected. exacqVision User Manual Page 189 1/24/2011...
  • Page 190 When the user logs in to the system, the user will not have access to the sources that are restricted for tha will not have access to the sources that are restricted for that account. exacqVision User Manual Page 190 1/24/2011...
  • Page 191 Cancel. To delete an existing user account, select it l the creation of the new user, click Cancel. To delete an existing user account, select it from the User Accounts list and click Delete. from the User Accounts list and click Delete. exacqVision User Manual Page 191 1/24/2011...

  • Page 192: Raid Setup

    RAID Setup Your exacqVision RAID system has redundant hard drive to protect data upon hard drive failure. Your exacqVision RAID system has redundant hard drive to protect data upon hard drive failure. Your exacqVision RAID system has redundant hard drive to protect data upon hard drive failure.

  • Page 193: Remote Client Software Setup

    2. Close all programs, including any antivirus software. Close all programs, including any antivirus software. 3. Insert the exacqVision CD into your PC exacqVision CD into your PC CD-ROM drive and the installation wizard will and the installation wizard will prompt you for installation instructions prompt you for installation instructions.
  • Page 194 User Manual Page 194 1/24/2011...
  • Page 195 User Manual Page 195 1/24/2011...
  • Page 196 User Manual Page 196 1/24/2011...

  • Page 197: Starting The Exacqvision Remote Client Application Starting The Exacqvision Remote Client Application

    Starting the exacqVision Starting the exacqVision Remote Client Application The exacqVision Remote Client will automatically start if you choose The exacqVision Remote Client will automatically start if you choose “Run exac “Run exacqVision Client on System Startup” in the installation procedure above.
  • Page 198 To display live video either drag a camera into the camera display area or click on one of the blue To display live video either drag a camera into the camera display area or click on one of the blue display modes. exacqVision User Manual Page 198 1/24/2011...

  • Page 199: Special Features

    You can then maximize the application to fill the monitor.
  • Page 200 NOTE: You can drag multiple cameras by selecting a different layout button You can drag multiple cameras by selecting a different layout button You can drag multiple cameras by selecting a different layout button on your second monitor. exacqVision User Manual Page 200 1/24/2011...

  • Page 201: Active Directory/Openldap

    On the Active Directory server, enter 127.0.0.1 as its own DNS server address. On the exacqVision server or client computer, designate On the exacqVision server or client computer, designate the Active Directory server as the preferred DNS the Active Directory server as the preferred DNS server.
  • Page 202 192.168.1.70 12. If installing an exacqVision server, add a service principal name on the Active Directory server for the If installing an exacqVision server, add a service principal name on the Active Directory server for the If installing an exacqVision server, add a service principal name on the Active Directory server for the exacqVision server.
  • Page 203 15. If installing an exacqVision server, configure the directory settings. To do this, complete the following steps: If installing an exacqVision server, configure the directory settings. To do this, complete the following steps: If installing an exacqVision server, configure the directory settings. To do this, complete the following steps: A.

  • Page 204: Windows Server & Client And Openldap/Kerberos Openldap/Kerberos

    Windows machine to the OpenLDAP/Kerberos domain OpenLDAP/Kerberos domain, as shown in the following examples (all are case shown in the following examples (all are case-sensitive): ksetup /addkdc EXACQ.TEST.COM kdc.exacq.test.com ksetup /addkdc EXACQ.TEST.COM kdc.exacq.test.com ksetup /addkpasswd EXACQ.TEST.COM kdc.exacq.test.com /addkpasswd EXACQ.TEST.COM kdc.exacq.test.com /addkpasswd EXACQ.TEST.COM kdc.exacq.test.com...
  • Page 205 Run the exacqVision Client and connect to the local server (127.0.0.1) using the default “admin” account. C. Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System tab.
  • Page 206 Enter the LDAP Base DN, the container of all directory user accounts or groups that you want to map in the exacqVision software. For example, if the domain were map in the exacqVision software. For example, if the domain were exacq.te exacq.test.com, the LDAP Base...

  • Page 207: Ubuntu Linux Server & Client And Active Directory Ubuntu Linux Server & Client And Active Directory

    11. In Active Directory, create a keytab file for the Linux exacqVision ser In Active Directory, create a keytab file for the Linux exacqVision server. At a command prompt on the ver. At a command prompt on the Active Directory server, determine your Active Directory version and then type the following:...
  • Page 208 If you purchased the system from Exacq after 2009, MIT Kerberos V5 is likely already installed. 15. Make sure the fully qualified host names of the Active Directory server and exacqVision server can be Make sure the fully qualified host names of the Active Directory server and exacqVision server can be Make sure the fully qualified host names of the Active Directory server and exacqVision server can be resolved.
  • Page 209  If you do not already have a keytab file on the exacqVision server If you do not already have a keytab file on the exacqVision server, which could happen if you do , which could happen if you do...
  • Page 210 Run the exacqVision Client and connect to the local server (127.0.0.1) using the default “admin” account. C. Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System tab.

  • Page 211: Ubuntu Linux Server & Client And Openldap/Kerberos Ubuntu Linux Server & Client And Openldap/Kerberos

    "o=Engineers,dc=exacq,dc=test,dc=com." neers,dc=exacq,dc=test,dc=com." If installing an exacqVision server, complete steps 5 through 10. Otherwise, skip to step 11. If installing an exacqVision server, complete steps 5 through 10. Otherwise, skip to step 11. If installing an exacqVision server, complete steps 5 through 10. Otherwise, skip to step 11.
  • Page 212 10. Copy the keytab file to a location from where it can be installed on the Linux Copy the keytab file to a location from where it can be installed on the Linux exacqVision Server later in this exacqVision Server later in this procedure.
  • Page 213  If you do not already have a keytab file on the If you do not already have a keytab file on the exacqVision server, which could happen if you do , which could happen if you do not use any other Kerberos not use any other Kerberos-related software on the server, copy the file to related software on the server, copy the file to /etc/krb5.keytab.
  • Page 214 (127.0.0.1) using the default “admin” account. C. Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System Open the System Setup page for the exacqVision server you want to license and select the System tab.

  • Page 215: Mac Os X Client And Active Directory/Openldap/Kerberos Client And Active Directory/Openldap/Kerberos

    192.168.1.70 Make sure the fully qualified host names of the directory serve Make sure the fully qualified host names of the directory server and exacqVision server can be resolved. To r and exacqVision server can be resolved. To do this, open a terminal window, ping the fully qualified host names, and look for a reply. Make sure the IP do this, open a terminal window, ping the fully qualified host names, and look for a reply.

  • Page 216: Connecting To Exacqvision Servers Connecting To Exacqvision Servers

    Add Systems page, select Use Single Sign-On, and click Apply.  If using the Linux version of the exacqVision Client, you can use any domain user account. Use the kinit If using the Linux version of the exacqVision Client, you can use any domain user account. Use the kinit If using the Linux version of the exacqVision Client, you can use any domain user account.

  • Page 217: Troubleshooting

    The information outlined in this section may be helpful if you experience a problem with your if you experience a problem with your ExacqVision System. If you are unable to find the information you need or cannot resolve the If you are unable to find the information you need or cannot resolve the...
  • Page 218 A healthy RAID system is reflected in this screen shot. A healthy RAID system is reflected in this screen shot. Select the Volume to display details about the hard drives. to display details about the hard drives. exacqVision User Manual Page 218 1/24/2011...
  • Page 219 The hard drives will be listed in the Parameter column, and the status will be listed in the The hard drives will be listed in the Parameter column, and the status will be listed in the Value column. exacqVision User Manual Page 219 1/24/2011...
  • Page 220  On exacqVision systems, Windows is set at the factory to boot into the operating system restricted account On exacqVision systems, Windows is set at the factory to boot into the operating system restricted account On exacqVision systems, Windows is set at the factory to boot into the operating system restricted account called User and automatically start the exacqVision Client.
  • Page 221 Non-RAID hard drives tree item and select “Rebuild to this Hard Drive”. rives tree item and select “Rebuild to this Hard Drive”. The following wizard will be displaye The following wizard will be displayed:  Press Next exacqVision User Manual Page 221 1/24/2011...
  • Page 222  The single new drive should automatically be shown in the “Selected” list. The single new drive should automatically be shown in the “Selected” list. Press Next Press Next exacqVision User Manual Page 222 1/24/2011...
  • Page 223 “Data” using the new hard drive. The wizard will close and you will see a screen similar to the following: The wizard will close and you will see a screen similar to the following: exacqVision User Manual Page 223 1/24/2011...
  • Page 224 Do not log out of the admin operating system account until this process has completed operating system account until this process has completed. If your exacqVision Server was set up to notify you on If your exacqVision Server was set up to notify you on...

  • Page 225: Display Issues

    Install the new drivers. Restart the exacqVision Client Restart the exacqVision Client. If you are still experiencing a display issue, continue to step 6. If you are still experiencing a display issue, continue to step 6. Go to the Setup mode, Client Go to the Setup mode, Client Setup tree item.
  • Page 226 If the display issue persists, repeat step issue persists, repeat step 7), selecting the None radio button. exacqVision User Manual Page 226 1/24/2011...

  • Page 227: Technical Support

    Exacq Technologies is committed to providing exceptional technical and engineering support. When you need help with your When you need help with your exacqVision product, please be ready with a complete description complete description of the problem, including any error messages or instructions on re of the problem, including any error messages or instructions on re-creating the error.

  • Page 228: Regulatory Notice

    Reorient the television or radio receiving antenna, and/or relocate the the television or radio receiving antenna, and/or relocate the Exacq product and the radio or TV with and the radio or TV with respect to each other.

  • Page 229: Warranty

    Exacq or its or any other damages arising out of the use or inability to use the products, even if Exacq or its licensors, distributors, and suppliers has been advised of the possibility of such damages.

  • Page 230: Manual Updates

    Monitor Operation section in the Special Features chapter to include lti Monitor Operation section in the Special Features chapter to include instructions for dragging and dropping instructions for dragging and dropping between separate instances of the client. separate instances of the client. exacqVision User Manual Page 230 1/24/2011...

  • Page 231: Release 3.0

    Added the ability to display the Find Camera dialog by pressing F3 or the joystick button to Added the ability to display the Find Camera dialog by pressing F3 or the joystick button to Layout Panel section. exacqVision User Manual Page 231 1/24/2011...

  • Page 232: Release 3.5

     Added note about the Case Sensitive options to the Serial Profile Setup section. Added note about the Case Sensitive options to the Serial Profile Setup section. Added note about the Case Sensitive options to the Serial Profile Setup section. exacqVision User Manual Page 232 1/24/2011...

Table of Contents

Save PDF