Related Manuals for Bel Canto e.One series S125
Summary of Contents for Bel Canto e.One series S125
- Page 2 Bel Canto Design Limited. Bel Canto Design Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Trademarks used in this publication: Bel Canto and the Bel Canto logo are registered trademarks of Bel Canto Design Limited.
- Page 3 Explanation of symbols used in this manual or on the CAUTION rear/underside of the apparatus: • To reduce the risks of electric shock, do not remove the cover. • No user serviceable parts inside. This symbol is intended to alert the user to •...
- Page 4 Fit a new 10 amp BS1362 approved fuse into the carrier GROUNDED. and push the carrier back into the plug. Bel Canto Design Ltd. declare that this product is in conformance The conformity of the designated product with the provisions of with the Low Voltage Directive 73/23/EEC and Electromagnetic...
- Page 5 Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online (http://www.belcantodesign.com/Belcanto_Warranty.html) within 30 days of purchase from an authorized dealer to automatically extend your warranty for 2 years starting from the date of purchase. If you do not have web access, please contact your dealer for assistance.
- Page 6 This is achieved in a compact and elegant product through our adaptation of the latest analog switching amplifier and power supply technology from the ICEpower group. Bel Canto’s new generation of e.One analog switching audio power amplifiers extend our leadership in this technology. These amplifiers incorporate performance enhancing technologies that bring musicality and performance to new levels.
-
Page 7: Rear Panel Connections
Rear Panel Connections Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact! Connecting any Speaker Output on the S125 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty. Power Switch: Power is on when the switch is Input Connections and RCA/XLR switch: When •... - Page 8 LED is not lit, this indicates that the internal fuse may have blown. If this occurs contact your dealer, distributor or Bel Canto for service. There are no user replaceable fuses or other parts. Opening the chassis will void your warranty.
- Page 9 Maximum Power Output: 130W 4 ohms, 70W 8 ohms per channel Power Output 1% THD: 120W 4 ohms, 60W 8 ohms per channel Minimum Load: 3 ohms per channel Peak Output Current: 30 amperes Frequency Response: +/-3 dB 1.5Hz-90KHz, 4 ohm load THD+N: 0.003% 1W, 1KHz, 4 ohms IMD (CCIF):...
- Page 10 version 2.0...
Need help?
Do you have a question about the e.One series S125 and is the answer not in the manual?
Questions and answers