Receiver Unit Replacement - Panasonic WH-416KZ Operating Instructions Manual

Receiver Unit Replacement

The sizes of receiver units are 0, 1, 2 and 3. If the length of the receiver unit does not fit you, consult your dispenser.
1
Main unit
Antiskid pad *
Pinch the connector of the receiver unit with the antiskid pad and hold
it with your thumb and forefinger. Pull the receiver unit straight out,
so it will be removed from the main unit. Do not twist or pull hard.
* The antiskid pad is supplied with the receiver unit.
· Be sure to use the receiver unit of the following model number.
(WH-04KZF1R0A, WH-04KZF1R1A, WH-04KZF1R2A, WH-04KZF1R3A, WH-04KZF1L0A, WH-04KZF1L1A, WH-04KZF1L2A, WH-04KZF1L3A)
· When replacing the receiver unit, be sure to remove the Zinc Air battery. See Page 21.
Receiver
unit
(Be sure to ask your dispenser)
2
Plug
Insert the plug into the main unit, placing the pitted
portion of the plug of the receiver unit into the
centerline of the main unit until it snaps into place.
Centerline of
the main unit
Pitted portion
of the plug
29