Fire bricks gas ovens with single gas burner, thermostatic digital controls (26 pages)
Summary of Contents for Morello Forni RANGE FGRi
Page 1
++39. 010 7492194 e-mail: info@morelloforni.com Technical Assistance: contact your local dealer or the manufacturer. The manufacturer reserves the right to change, at any time and without prior notice, the contents of this instruction manual. RANGE FGRi MORELLO FORNI S. A. S.
- Correct and safe installation of the oven received - Power supply - Compliance of the gas supply with the testing requirements - Connection to the flue - Consumables for cleaning - Ordinary maintenance - manutenzione ordinaria RANGE FGRi MORELLO FORNI S. A. S.
All technical problems or servicing requests should be addressed to the supplier of the oven. 1.7 ORDERING SPARE PARTS All spare parts can be ordered from the supplier of the oven who has a list of spare parts. RANGE FGRi MORELLO FORNI S. A. S.
FIG.2 Weight Ref. /Mod (Kg) FGRi 100 1700 FGRi 110 2200 FGRi 130 2600 Ref. / Ø A Ø B Ø M FGRi 100 FGRi 110 FGRi 130 ALL DIMENSIONS ARE IN CENTIMETERS RANGE FGRi MORELLO FORNI S. A. S.
2.2 RECEIVING OF THE OVEN Upon receipt of an oven manufactured by “MORELLO FORNI”, it is necessary to carefully read this manual before performing any handling or installation operation. The oven has been designed with the utmost attention and must be handled very carefully by the carrier. All handling operations must be performed with efficient and appropriate unloading and installation equipment.
- The area next to the lower section of the crown burner must be free to allow the natural ventilation of the burner and easy access for regular maintenance (FIG. 4). ATTENTION! THE OBSTRUCTION, THOUGH PARTIAL, OF THIS AREA MAY AFFECT THE OPERATION OF BURNERS AND THEIR SAFETY. RANGE FGRi MORELLO FORNI S. A. S.
13. Light MF.01.008 32. Fuse 2,5 A MF.01.051 14. Light Relay R8 MF.01.010.24 15. Light Relay R9 MF.01.010.24 16. Dome Relay R1 MF.01.010.24 17. Dome Relay R2 MF.01.010 18. Dome Relay R3 MF.01.010.24 RANGE FGRi MORELLO FORNI S. A. S.
The gas supply must be directly connected to the forced evacuation system and designed to disconnect if the flow rate of the gas falls below the limits specified in installation requirements. The gas supply should be resumed manually only. RANGE FGRi MORELLO FORNI S. A. S.
3.7 OPERATING CHARACTERISTICS The ovens manufactured by Morello Forni are preset to work with the type of gas spe- cified in the order. To be able to use them with gases that are not specified on the table supplied with the oven, it is first necessary to adapt them.
Alternatively, it is also possible to use the counter and verify that there is no gas flow within an interval of approximately 10 minutes. ATTENTION: NEVER USE FLAMES TO LOCALIZE GAS LEAKS! RANGE FGRi MORELLO FORNI S. A. S.
The CVI system comprises a gas valve directly driven and connected to the gas ignition system.The oven can be safely used with the following types of gases: GPL, methane and processed gases.FIG.8 shows the safety valve on the bedplate configured for the operation of the oven. FIG.8 RANGE FGRi MORELLO FORNI S. A. S.
The burner turns on with a low flame, reaching the value preset by users within a few seconds thanks to the soft ignition system (SOFTLITE) fitted on the CVI system of the crown burner. RANGE FGRi MORELLO FORNI S. A. S.
MAINTENANCE Modulplus requires an annual inspection and check of the minimum and maximum pressures of the crown burner, and their adjustment if necessary. FIG.10 RANGE FGRi MORELLO FORNI S. A. S.
CVI safety valve. The oven can be started both with the crown and bedplate burners, only if the manual door of the oven has been completely removed from the oven door. RANGE FGRi MORELLO FORNI S. A. S.
- Turn the main ON/OFF switch to ON (if positioned on OFF). - Turn the ON/OFF switch of the bedplate burner to ON; if the temperature set requires it, the CVI system starts the burner until it detects and stabilizes the bedplate burner flame. RANGE FGRi MORELLO FORNI S. A. S.
7) When you have finished using the oven, put out the fire and the auxiliary plate burner, then close the oven door in order to retain the residual heat for the next work cycle. RANGE FGRi MORELLO FORNI S. A. S.
H H H H H H WALNUT LITTLE EXCELLENT H H H H VERY LITTLE FAIR. H H H H ALDER MODERATE NEGLIGIBLE H H H H LITTLE FAIR. H H H H H RANGE FGRi MORELLO FORNI S. A. S.
One touch on icon (6) “On/Off” activates dome and bedplate temperature releaver and relating status for thermostatic intervention system. Start button shows own running status changing Color from red to green and V/V. RANGE FGRi MORELLO FORNI S. A. S.
Page 21
Active ongoing speed is marked by one Scale made by a series of queued lights Which lightening following action releaved On buttons (+)/(-) from minimum to maximum. After 5 seconds without any action releaved Selected speed becomes rekorded. RANGE FGRi MORELLO FORNI S. A. S.
Flashing icon (4) Dome Temp. monitor or (11) Bedplate temp. monitor showing active Change status for captioned value. By selected temperature for dome or bedplate, Relating burner, when enable to run, can Switch on to heat proper area. RANGE FGRi MORELLO FORNI S. A. S.
Ovens equipped by light system, display on screen Icon relating button (15) “light button”. Switch on happens pressing said icon which shows Own action by color change from blue to white when light switch off becomes on. RANGE FGRi MORELLO FORNI S. A. S.
Thereafter screen output a series of six sounds To alert user about baking end-time for fi rst Batch-in product. User alerted can churn-out First pizzas and follows by others within an Averaged end abt. 30 secs. RANGE FGRi MORELLO FORNI S. A. S.
User can record other two baking programs and rotation speeds onto buttons (2) and (3) which can be also settled selecting max time (999) for recorded rotation speeds to recall by correspondant icon.. RANGE FGRi MORELLO FORNI S. A. S.
Need help?
Do you have a question about the RANGE FGRi and is the answer not in the manual?
Questions and answers