Panel Cutout Template; Gdu 37X Panel Cutout Template - Garmin G3X Installation Manual

2.9 Panel Cutout Template

Figure 2-3 can be used as a template when marking the panel for cutout. Dimensions below are to verify
accuracy of printout only, see Figure D-1.2 for complete dimensions.

GDU 37X PANEL CUTOUT TEMPLATE

IMPORTANT!
Ensure the Page Scaling setting
is set to NONE when printing
this page. Verify dimensions
of printed
accurate before cutting panel.
For corner holes, center punch and drill
(#36) / tap (6/32) to create threaded holes
drill out with 25 drill bit and use Garmin
nut-plate P/N 115-01054-00
Page 2-6
Revision E
template
5.57 in
[141.4 mm]
OR
Figure 2-3. GDU 37X Panel Cutout Template
Cut out panel
to inside line
are
7.33 in
[186.2 mm]
G3X Installation Manual – GDU 37X
190-01115-01