Display Board Diagnostics; Exiting The Diagnostics System - Electrolux Washing machine Service Manual

Washing machines with ewm 1000 plus electronic control system and “delta 3” display board

Hide thumbs Also See for Washing machine:

Table of Contents

9.2.1

Display board diagnostics

After entering the diagnostics system, the display board is checked: all LEDs and the display light in

sequence (if featured).

Pressing the buttons the corresponding LEDs light; the display shows the relative code to the

codification of the button and the buzzer sounds.

When the "FABRICS" (1) or "TEMPERATURE" (2) button is pressed, the relative LEDs light for a

second and the button code is displayed; at the end of the beep of the buzzer the diagnostics

programme passes one phase forward or back.

To exit the diagnostics system switch the appliance off,

then on and then switch off again.

SOI/DT 2005-07 dmm

49/59

599 37 22-15

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Washing machine and is the answer not in the manual?

Ewm 1000 plus