Table of Contents
Advertisement
Quick Links
Dear Customer,
Congratulations! You are now the proud owner of a Bajaj Storage Water Heater, the most durable, dependable and
safe product in the market today. And we mean what we say.
Why? Because we at Bajaj understand your concern, your need for reassurance. So we designed our Storage Water
Heaters with one single minded objective - Safety. Total protection for you and your family, for years to come.
This manual will answer all your questions and remove your doubts. We have provided a detailed description of our
Storage Water Heaters and clear instructions for Installation and operation. Read this manual carefully, follow the
instructions and we guarantee you will never have to worry about your Storage Water Heaters again.
KNOW YOUR BAJAJ STORAGE WATER HEATER
How does it function?
1.
Every Bajaj Storage Water heater Unit is made of
a. an outer body, inner tank, heating element
b. Safety devices like safety valve, Thermostat, Thermal cut-out, fusible plugs and
c. Thermal insulation to retain heat.
2.
When the tank is full (this becomes clear when water starts flowing through the outlet) switch ON the power
supply.
3.
The heating element heats up the water. At a pre-fixed temperature, the Thermostat automatically switches
OFF the power supply to the unit which is indicated by the switching OFF of green lamp.
4.
You can now take the water out through the outlet. Because of the design of the heater & displacement
principle, fresh cold water keeps entering through the inlet.
5.
As temperature of water inside the tank drops, the Thermostat again switches ON the power supply to the
heater. When this happens, water starts heating up again. This process continues till you switch OFF the
main power supply to the heater after usage.
6.
Since it takes a longer time for the water to heat up in storage water heater, it is advisable to switch ON the
power supply to the unit well in advance of the actual usage.
7.
During normal functioning, red lamp does not glow. In case it glows, call the nearest Bajaj Sales and Service
Centre.
bajaj electricals limited
KNOW YOUR
Bajaj
Storage Water Heater
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for Bajaj Storage Water Heater
Summary of Contents for Bajaj Storage Water Heater
- Page 1 Since it takes a longer time for the water to heat up in storage water heater, it is advisable to switch ON the power supply to the unit well in advance of the actual usage.
-
Page 2: Safety Systems
UNIT IS OPERATED WITHOUT WATER. FUSIBLE PLUG: All Bajaj Storage Water Heaters are provided with fusible plug, at the bottom. In the rare case that the Thermostat & Thermal cut-out fails, this plug melts, releasing hot water and steam. Thus it helps in avoiding untoward accidents. - Page 3 NON-RETURN DEVICE: There is a siphon hole on the inlet pipe inside the inner tanks of all Bajaj Storage Water Heaters. When pressure inside the tank becomes low, this siphon hole prevents back flow of water. It acts as a non return device upto a certain level of low pressure.
- Page 4 USE A CONTROL VALVE AT THE INLET. MAKE SURE THAT IT IS ALWAYS KEPT OPEN. Technical Specification Table. Check where your storage Water Heater Fits in. (Ref Fig.2, 3, 4 &5) Model...
- Page 5 The power supply to the Heater can be kept ON continuously. But is is advisable to switch it OFF when the unit is not in use for a long time to save on electricity. Bajaj Storage water heater Performance Parametres as Per BIS Model...
- Page 6 In case of any problem with the heater contact the nearest Bajaj sales or service centre. Be very sure that you do not increase the setting of the thermostat more than the pre-fixed temperature.
Need help?
Do you have a question about the Storage Water Heater and is the answer not in the manual?
Questions and answers